Toyota 2004 HIGHLANDER User Manual page 339

—Reinstalling wheel ornament
Type A
Type B
'04 HIGHLANDER_U (L/O 0308)
10.Reinstall the wheel ornament.
1. Put the wheel ornament into posi-
tion.
2. Then tap it firmly with the side or
heel of your hand to snap it into
place.
CAUTION
Take due care in handling the or-
nament to avoid unexpected per-
sonal injury.
—After changing wheels
11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specifi-
cation designated on page 402 in
Section 8. If the pressure is lower,
drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire infla-
tion valve cap as dirt and moisture
could get into the valve core and
possibly cause air leakage. If the cap
is missing, have a new one put on as
soon as possible.
12.Restow all the tools, jack and
flat tire securely.
As soon after changing wheels as
possible, tighten the wheel nuts to the
torque specified on page 402 in Sec-
tion 8 with a torque wrench. Have a
technician repair the flat tire and re-
place the spare tire with it.
Initial adjustment of the tire pres-
sure warning system is necessary
after you have replaced your tires
or wheels. See "Tire pressure
warning system" on page 155 in
Section 1- 7.
2004 HIGHLANDER from Aug. '03 Prod. (OM48478U)
339