Toyota 2004 HIGHLANDER User Manual page 20

The timing for the automatic door lock
function can be changed. For details, con-
tact your Toyota dealer.
If the "LOCK" or "UNLOCK" switch is kept
pressed in, the locking or unlocking opera-
tion is not repeated. Release the switch
and then push again.
The wireless door locking or unlocking
function can be erased. For details, con-
tact your Toyota dealer.
SWITCHING BEEP SOUND ON AND OFF
You can switch the beep on and off. (The
beep is on initially and after battery re-
placement.)
To switch the beep on and off:
With the driver's door opened—
1. Insert the ignition key and remove it.
2. Within 5 seconds, insert the ignition
key again and turn it to the "ON" posi-
tion.
3. After 10 seconds, push the
"LOCK", "UNLOCK" or "PANIC" switch
twice within 10 seconds.
Two beep sounds inform you that the
program has been switched on or off.
If this procedure is not followed exactly,
the beep will not operate as expected.
20
'04 HIGHLANDER_U (L/O 0308)
Check the beep ON/OFF operation by
pushing the transmitter switch after you
finish this procedure. If the beep does not
operate as expected, repeat this proce-
dure from step 1.
same
"PANIC" SWITCH
Pushing the "PANIC" switch blows the
horn intermittently and
headlights and tail lights.
The "PANIC" switch is used to deter ve-
hicle theft when you witness anyone at-
tempting to break into or damage your
vehicle.
The alarm will last for one minute. To stop
alarm midway, do the following:
D
Push the "PANIC" switch once again.
D
Unlock any of side door or back door
with the key or wireless remote control
transmitter.
D
Turn the ignition key from the "LOCK"
to "ON" position.
2004 HIGHLANDER from Aug. '03 Prod. (OM48478U)
flashes the