Toyota 2004 HIGHLANDER User Manual page 102

Canada only
Type B
102
'04 HIGHLANDER_U (L/O 0308)
For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag in the
seatback.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag in the
seatback.
2. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 99 in this Section.)
For the installation details, refer to the
instruction manual equipped
product.
CAUTION
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
the
jects around the anchorages or that
the seat belt is not caught.
D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
D
When using the lower anchorages
for the child restraint system, en-
the
sure that the seat is moved to the
rear- most position, with the seat-
back close to the child restraint
system.
D
After securing the child restraint
system, never slide or recline the
seat.
2004 HIGHLANDER from Aug. '03 Prod. (OM48478U)
with each