Odometer And Tripmeters; Residual Range - BMW S 1000 RR Rider's Manual

Press button 2 to step the
4
minutes reading down.
When the minutes reading is
38
correct, press and hold down
button 2 until the number
stops flashing.
This completes the process.
Odometer and
tripmeters
Selecting readings
z
Switch on the ignition.
Repeatedly press button 1 until
the value you want appears in
panel 3.
The following values can be dis-
played:
Total distance covered
Trip I
Tripmeter 1 (
Trip II
Tripmeter 2 (
Residual range (once fuel level
is down to reserve)
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 1
until the tripmeter reading is
reset.

Residual range

)
)
The residual-range readout 1 in-
dicates how far you can ride with
the fuel remaining in the tank.
This reading is not displayed until
fuel level has dropped to reserve.
This distance is calculated on the
basis of fuel level and average
consumption.
When refuelling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. If the sensor can-
not register the new level the