Table of Contents
Advertisement
Press button 2 to decrease
4
minutes.
When minutes have been set
38
as desired, press button 2 until
minutes no longer flash.
Setting is completed.
Odometer and
tripmeters
Selecting readings
Switch on ignition.
z
Press button 1 repeatedly until
desired value is displayed in
area 3.
The following values can be dis-
played:
Total distance covered
Trip I
Tripmeter 1 (
Trip II
Tripmeter 2 (
Operating range (after reaching
reserve level)
Resetting tripmeter
Switch on ignition.
Select desired tripmeter.
Press and hold button 1 until
tripmeter has been reset.
Residual range
)
)
The operating range 1 indicates
what distance can still be driven
with the remaining fuel. It is only
displayed after the fuel reserve
is reached. This distance is cal-
culated on the basis of fuel level
and average consumption.
When refueling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. If the sensor can-
not register the new level the
Advertisement
Table of Contents
