Ride Mode - BMW S 1000 RR Rider's Manual

Press and hold down button 1
until DTC warning light 3
changes status.
DTC warning light starts to
show.
Release button 1 within two
seconds.
DTC warning light remains
ON.
The DTC function is deactiv-
ated.
Activating DTC function
Press and hold down button 1
until DTC warning light 3
changes status.
DTC warning light goes
out; if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
DTC warning light remains
off or continues to flash.
The DTC function is activated.
If the coding plug for the
SLICK function is not inserted,
switching the ignition off and
then on again will have the
same effect.
A DTC fault has occurred
if the DTC warning light
shows when the motorcycle
accelerates to a speed in ex-
cess of 5 km/h after the ignition
was switched off and then on
again.

Ride mode

Setting riding mode
Switch on the ignition.
Press button 1.
4
43
z