Toshiba e-Studio3511 Service Handbook page 75

Classifi-
Code
cation
667-0 Image Setting beam
level conversion
667-1
667-2
667-3
667-4
693 Image Range correction
on original set on
the RADF
694
695
700 Image Adjustment of
binarized thresh-
old
701 (Text)
702
710 Image Density adjust-
ment "manual
density" fine
714 adjustment/Center
value
715 Image Density adjust-
ment "manual
density" fine
719 adjustment/Light
step value
November 2003 © TOSHIBA TEC
Adjustment mode (05)
Default
Func-
Items
<Acceptable
tion
value>
Beam PPC
level 0/4 (black) <0-255>
Beam PPC
level 1/4 (black) <0-255>
Beam PPC
level 2/4 (black) <0-255>
Beam PPC
level 3/4 (black) <0-255>
Beam PPC
level 4/4 (black) <0-255>
Text PPC
/Photo (black) <11-14,
21-24
31-34
41-44>
Photo PPC
(black) <11-14,
21-24,
31-34,
41-44>
Text PPC
(black) <11-14,
21-24,
31-34
41-44>
Center FAX
value (black) <0-255>
Light FAX
step (black) <0-255>
value
Dark FAX
step (black) <0-255>
value
Photo FAX
(black) <0-255>
Text FAX
/Photo (black) <0-255>
Photo FAX
(black) <0-255>
Text FAX
/Photo (black) <0-255>
2 - 55
RAM Contents
0 M Sets the beam level for 4 divided
smoothing. The primary scanning
63 M direction is divided into 4 and the dot
width is set at the 5 levels (incl. level
127 M "0"). The smaller the value is, the
smaller the primary scanning
191 M direction of the dot becomes.
255 M
22 SYS Sets whether the values of the back-
ground peak and text peak are fixed or
not. One's place is an adjustment for
"automatic density" and ten's place is
for "manual density". Once they are
fixed, the range correction is performed
12 SYS with standard values.
The values of the background peak
and text peak affect the reproduction
of the background density and text
density respectively.
Background peak
22 SYS 1: fixed
2: varied
3: fixed
4: varied
125 SYS When the value increases, the image
of center value density becomes
darker.
20 SYS Sets the changing amount by 1 step
at the density adjustment.
When the value increases, the image
of "light" side becomes lighter.
20 SYS Sets the changing amount by 1 step
at the density adjustment.
When the value increases, the image
of "dark" side becomes darker.
128 SYS When the value increases, the image
of the center step density becomes
darker.
128 SYS
20 SYS Sets the changing amount by 1 step
at the density adjustment.
When the value increases, the image
20 SYS of the "light" steps becomes lighter.
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
4
4
4
4
4
1
1
Text peak
fixed 1
fixed
varied
varied
1
1
1
1
1
1
1