Combining Quick-Dial Numbers; Tone Or Pulse (Not Available In New Zealand) - Brother MFC-9840CDW User Manual

Chapter 8
i
If you selected B/W200dpi or
B/W200x100 in h, select the file format
(TIFF or PDF) that will be used to send
to your PC. If you selected
Color150dpi, Color300dpi or
Color600dpi in h, select the file
format (PDF or JPEG) that will be used
to send your PC. Press OK.
j
Do one of the following:
To store another group for
broadcasting. Go to b.
To finish storing groups for
broadcasting, press Stop/Exit.
Note
• Fax Broadcasting is for black & white only.
• You can easily print a list of all your
Speed-Dial numbers. Numbers that are
part of a group will be marked in the Group
column. (See Reports on page 79.)
Combining quick-dial
numbers
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed-Dial #003 and '7000' on Speed-Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Hold down Shift as you press
Search/Speed Dial, 003. Hold down Shift as
you press Search/Speed Dial, 002 and
Mono Start or Colour Start.
Numbers can be added manually by entering
them on the dial pad:
Hold down Shift as you press
Search/Speed Dial, 003, 7001 (on the dial
pad), and Mono Start or Colour Start.
This would dial '555-7001'. You can also add
a pause by pressing the Redial/Pause key.
66
Tone or pulse
(not available in New Zealand)
If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have a Touch Tone service, you
will not need this feature to send tone signals.
The default setting is Tone.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
8
8