Installing The Operator Information Panel Assembly - IBM System x3350 Type 4192 Problem Determination And Service Manual

10. Using a pencil or screwdriver, press the release buttons through the top of the
11. Pull the panel away from the rails and carefully pull the attached ribbon cable
12. If you are instructed to return the operator information panel assembly, follow

Installing the operator information panel assembly

To install the replacement operator information panel, complete the following steps:
108
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
Operator information
panel
9. Press the release button on the front of the operator information panel and
slide the assembly out of the server.
Ribbon cable
Operator information
panel
server and slide the operator information panel assembly rails out of the server
as far as they will go.
out of the server.
all packaging instructions, and use any packaging materials for shipping that
are supplied to you.
1. Read the safety information that begins on page vii and "Installation guidelines"
on page 57.
Release button
Release buttons