Eon Function - JVC CA-MD9R Instructions Manual

EON Function ——————————————————————————
The EON function allows the unit to switch temporarily to a broadcast program of your choice
(NEWS, TA, and/or INFO) from a different station except when you are listening to a non-RDS
stations (all AM (MW/LW) and some FM stations).
RDS
CONTROL
To set EON Standby reception, use the Remote Control:
1.
2.
EON ON/OFF
1
3.
TA/NEWS/
INFO
4
To cancel the EON function, press the EON ON/OFF button again so that the TA/NEWS/INFO
indicator goes off.
When this unit carries out EON Standby reception, this unit functions as follows:
16
The EON indicator lights up while receiving a station with the EON code.
EON Standby reception is applicable for preset stations only.
Press the RDS CONTROL button.
The number buttons on the Remote Control are set for the RDS operations.
Press the EON ON/OFF button.
The last EON data type selected — TA/NEWS/INFO — lights up.
Press the TA/NEWS/INFO button repeatedly until the EON data type you want is selected.
TA:
Identifies that a traffic announcement is being broadcast in your area.
NEWS: News
INFO:
Program the purpose of which is to impart advice in the widest sense.
Each time you press the TA/NEWS/INFO button, the EON data types change as follows:
TA NEWS INFO = TA
INFO = TA NEWS
TA NEWS
INFO = (back to the beginning)
TA NEWS
As soon as your selection is entered, the unit goes into EON Standby reception mode.
If you cancel the EON function while receiving a program selected by the EON function, the
unit goes back to the previously tuned station.
CASE 1
If there is no station broadcasting the program
you have selected
The unit continues tuning in the current station.
«
When a station starts broadcasting the program
you have selected, the unit automatically
switches to the station. The indicator of
received PTY code starts flashing.
«
When the program is over, the unit goes back
to the previously tuned station, but still
remains in EON Standby reception mode.
=
NEWS INFO TA
=
INFO TA
CASE 2
If there is a station broadcasting the program
you have selected
The unit tunes in the program. The indicator of
received PTY code starts flashing.
When the program is over, the unit goes back
to the previously tuned station, but still
remains in EON Standby reception mode.
=
NEWS INFO
NEWS INFO =
«