Changing The Display Mode - JVC CA-MD9R Instructions Manual

5.
When you finish checking all CDs or if there is no more remaining time for recording on the MD,
recording starts automatically.
"L. EDIT" appears on the display and recording starts.
CD
CD
If the remaining time of the MD becomes short, this unit will search a track fitting into the
remaining time. To include the selected track in the program, press the LISTENING button.
To find another track, press the SKIP button.
To finish programing and to start recording before checking all the tracks of the loaded CDs, press
the CD REC button. "L.EDIT" appears and the recording starts.
To stop recording, press the 7 button.
To erase the program, press the 7 button while checking the contents of the loaded CDs.
Changing the Display Mode —————————————————————
You can check the CD track number and the MD track number while recording.
Press and hold the DISPLAY/CHARA button on the unit. While holding the button, the following
DISPLAY
information appears on the display.
/CHARA
3
2
1
1 2 3 4 5 6 7 8 9 10 11 12
CD track number currently playing
3
CD
2
1
MD
1
MD track number currently being recorded
3
3
MD
CD
\ 2
2
1
1
CD
1 2
Remaining time of
the current track
3
2
1
3
2
1
3 4 5 6 7 8 9 10 11 12
Remaining time
of the MD
MD
MD