Moving The Printer - Canon Laser Shot LBP3500 Getting Started Manual

Installation Space
The dimensions of each part, foot positions, and the space required for using
the printer with the paper feeder installed are indicated in the following
figures:
•
Dimensions of the Printer
Front Surface
93.8 172.2
121.6
Tray Extension
Auxiliary Tray
Multi-purpose Tray
32.6
•
Required Peripheral Space
Front Surface
1228.7
465
Step
6
•
Foot Positions of the Paper Feeder
Front Surface
The rubber feet are 1 mm high and their top surface is 12 mm x 12 mm square.
40
184 40.6 Auxiliary Tray
88.6
Tray Extension
Auxiliary Tray
438.7
Sub-output Tray
325
57.9 332 211
57.9 332 211

Moving the Printer

When installing the paper feeder in the printer after installing the printer,
move the printer to an appropriate location temporarily using the following
procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug,
and then disconnect all the interface cables from the printer before
(mm)
moving the printer. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
CAUTION
Do not carry the printer with the paper cassette attached. If you do
so, the paper cassette may drop resulting in personal injury.
1
Turn the printer and computer OFF a, remove the USB
cable b, and then disconnect the power plug from the AC
(mm)
power outlet c.
a
(mm)
c
b
a