Selecting The Surround Modes; Presetting Automatic Dvd Video Sound Increase Level; Changing The Picture Tone - JVC CA-DXU20 Instructions Manual

Selecting the Surround Modes

• For "DVD/CD" and "USB" (multi-channel software):
SURROUND
DOLBY D/DTS/PPCM/LPCM
AUTO
MODE
Initial setting: DOLBY D/DTS/PPCM/LPCM*
• For "DVD/CD" and "USB" (stereo software), "TAPE"
and "AUX":
SURROUND
AUTO ALL CH ST
MODE
STEREO STADIUM
Initial setting: ALL CH ST
• For "TUNER AM" and "TUNER FM":
SURROUND
AUTO
MODE
STEREO
Initial setting: ALL CH ST
DSP Modes
ALL CH ST All Channel Stereo; Creates larger stereo
sound field using all the connected
speakers.
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in an
outdoor stadium.
Stereo Mode
STEREO Cancels the Surround Mode.
Auto Surround Mode
AUTO The System automatically selects an
appropriate Surround Mode or Stereo Mode
according to the incoming signals. For
example, a multi-channel source is
automatically reproduced in an appropriate
Multi-channel Surround Mode.
Multi-channel Surround Modes*
DOLBY D
For multi-channel encoded Dolby Digital
source.
DTS For multi-channel encoded DTS source.
PPCM For multi-channel encoded PPCM (Packed
PCM) source.
LPCM For multi-channel encoded LPCM (Linear
PCM) source.
Dolby Pro Logic II Modes
MOVIE Creates 5.1-channel surround field from 2-
channel source (suitable for movie source).
MUSIC Creates 5.1-channel surround field from 2-
channel source (suitable for music source).
15
INFO
1
*
STEREO
1
2 2
* *
MOVIE MUSIC
HALL DANCE
ALL CH ST DANCE
STADIUM HALL
1
• While Surround Mode is activated,
lights up.
1
* Selectable Surround Mode varies depending on the
software.
* 2 MOVIE (Dolby Pro Logic II Movie) and MUSIC (Dolby
Pro Logic II Music) cannot be used for DivX file.
Presetting Automatic DVD Video
Sound Increase Level
The DVD Video sound is sometimes recorded at a lower
level than other discs and sources. You can set the increase
level for the currently loaded DVD Video, so you do not
have to adjust the volume when you change the source.
• This function is available only for DVD Video discs.
DVD LEVEL
DVD LEVEL1
• As the number increases, sound level also increases.
• The initial setting is "DVD LEVEL3."
Changing
the Picture Tone
While viewing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
SCAN MODE
VFP
2 Select a preset picture tone.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see next page).
indicator
Remote
ONLY
DVD LEVEL2
DVD LEVEL3
Remote
ONLY
NORMAL
0
GAMMA
BRIGHTNESS 0
CONTRAST 0
0
SATURATION
TINT 0
SHARPNESS 0
On the TV screen
NORMAL CINEMA
USER2 USER1