NEC Univerge SV8100 Features And Specifications Manual page 2151

UNIVERGE SV8100
Program
Program Name
Number
24-09-04 Call Forward Split Settings – CO
Call Forwarding Busy
Destination
24-09-05 Call Forward Split Settings –
Intercom Call Forwarding Busy
Destination
80-01-16 Service Tone Setup – Lockout
Tone
Out of Range Call Warning Notification:
Program
Program Name
Number
24-02-15 System Options for Transfer –
SIP Out of Range Timer
24-09-01 Call Forward Split Settings – Call
Forwarding Type
24-09-02 Call Forward Split Settings – CO
Call Forwarding Destination for
Both Ring, All Call, No Answer
Wireless DECT (SIP)
Description/Comments
Assign CO Call Forwarding for
busy destinations.
Assign Intercom Call Forwarding
for busy destinations.
Lock Out Tone Repeat Count.
Description/Comments
When not receiving any response
within this timer setting, system
determines SIP terminal is out of
range. When set to 0, timer is
invalid.
Type of Call Forwarding
Assign CO Call Forwarding
Destination for ring, all call and no
answer.
Assigned Data
1
#
0~9, , , P, R, @
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
#
0~9, , , P, R, @
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
Value 2 - 255
Assigned Data
1
0 ~ 30 (sec)
(default = 4)

0 = Call Forwarding Off
1 = Call Forwarding
with both ring
2 = Call Forwarding
when no answer
3 = Call Forwarding all

calls
4 = Call Forwarding
busy or no answer
5 = Call Forwarding
when busy
(default = 0)
#
0~9, , , P, R, @
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
Issue 13.0
Level
2 3



Level
2 3

2 - 2117