NEC Univerge SV8100 Features And Specifications Manual page 2074

Issue 13.0
Time, Date and Station Number Check
If the system has a DSP daughter board installed for VRS, any multiline terminal user can find out the
time, date or the extension number while their telephone is idle (on-hook). The time and date check
saves the user time since they do not have to look for a clock or calendar. Hearing the extension number
conveniently identifies non-display multiline terminals. To find out their extension number, the user can
press 6 (for umber). To listen to the time and date, the user can press 8 (for
N
Available with 64-Port Basic CD-CP00-US
The VRS feature is available with the 64-port Basic CD-CP00-US (no feature Upgrade PAL chip
required).
The VRS feature requires a PZ-VM21attached to the CD-CP00-US with the optional VRS flash card
installed. Although the PZ-VM21 is recognized for this feature, it provides no additional tone resources
(DTMF receivers, Caller ID receivers, or call progress tone detection).
Conditions
When the VM8000 InMail CF and PZ-VM21 are installed, the system provides two VRS

ports (VRS license not required).
VRS record time is fixed at two minutes and cannot be changed.

The Automated Attendant (VRS) can answer up to 16 calls simultaneously.

If Synchronous Ringing is enabled, the Preamble message cannot be used.

The maximum number of VRS ports is 16 when the PZ-ME50-US is installed on the CP00.

If the PZ-ME50-US is not installed, the maximum number of VRS ports is eight.
When the DISA/VRS Ring Group Transfer (Programs 25-03 and 25-04) is set to 104

(Speed Dial Bin), Speed dial will be treated as an internal call no matter what Program
13-01-01 is set to. If an outside number is needed, the trunk access code must be put into
the speed dial bin.
The number of speech path channels on the CD-CP00-US (CPU) for the VM8000 (In Mail)

and the VRS feature are shared and depends if the PZ-ME50 daughter board is installed.
Without a PZ-ME50 daughter board installed the systems supports a maximum of eight

channels for VRS and/or In-Mail.
With a PZ-ME50 daughter board installed, the system supports a maximum of 16 channels for

VRS and/or In-Mail. The maximum number of channels supported for In-Mail is eight.
When Program 25-16-02, is set to 0 = Off (Do not detect DTMF), after playing a VRS

greeting, the transfer destination set in Program 25-03-01 is followed.
Program 25-03-01 is set on a per trunk port base, not Dial-in number base.

A DISA Password can be detected regardless of Program 25-16-02 setting.

2 - 2040
UNIVERGE SV8100
ime/Date).
T
Voice Response System (VRS)