NEC Univerge SV8100 Features And Specifications Manual page 1954

Issue 13.0
Security: Enables or disables the Security Code requirement for the notification destinations. For

example, you may want to disable the Security Code when the destinations is your cell phone and
it may be inconvenient to dial digits after answering the notification callout.
When the extension user enables Cascading Message Notification, the system will try each enabled
destination that is active for the current day (Version 6000 or higher) and time (i.e., in-schedule). The
system will not try any destinations that are disabled or are not in-schedule. When the retries for a
particular destination have been met the system will immediately move to the next destination.
With Version 8000 or higher software, each mailbox can be set to queue notification options. When
this feature is enabled, messages received when destinations are not in-schedule are queued until a
destination is in-schedule at which time the notification process will start.
Conditions
When a mailbox has a new message and the message is deleted using the User Pro

interface, the MWI of the mailbox is turned off but Message Notification is not cancelled.
The Message Notification Queue feature requires Version 8000 or higher software and

the Version 8000
The Message Notification Queue feature can be changed using system programming only.

The Message Notification Queue feature is set on a per mailbox basis.

Main software Version 4000 (4.00 or higher) and the Version 4000 Main Version license

are required to support this feature.
The InMail language prompts installed on the CF must be Version 2.10 or higher. The

VM8000 InMail Utility is used to update the installed language prompts.
If the InMail CF has Version 2.00 instead of Version 2.10 or higher prompt sets installed,

only a single destination Message Notification is available using Notification Schedule
entry 1.
Retry Interval timers are set on a system wide basis only.

The pager dial string is set on a system wide basis only.

Notification settings can be changed using the Telephone Mailbox Option Interface or

system programming only.
When the retries for a particular destination have been met the system will immediately

move to the next destination even if there is only one destination active.
Once the notification process begins, a new message does not restart the process if it is

already in progress. Once the process ends (e.g., if the message is acknowledged or the
maximum number of callout attempts is reached), the next new message will restart the
process.
The system determines which numbers are internal extensions or external numbers by the

system dial plan settings.
2 - 1920
Enhancement license (0037)
.
VM8000 InMail – Cascade Message Notification
UNIVERGE SV8100