Setting Your LOGO
When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
1
FUNCTION
2
1
3
SET
repeatedly until display shows;
4
Enter your LOGO (max. 25 characters and digits) by
using the Character keys (see page 9).
Ex: P A N A S O N I C
If you make a mistake, use < ORIGINAL and
> RESOLUTION
character and enter the new character over it.
If more than 19 characters are entered, the left side
characters will scroll off the display.
5
SET
7
to move the cursor to the incorrect
STOP
User Parameters
SET MODE
(1–6)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
LOGO
PANASONIC
2
25