Using Password Transmission; Using Password Reception - Panasonic Panafax UF-744 User Manual

Using Password Transmission

To use Password Transmission, you can select PASSWORD-XMT OFF or ON for each Transmission by
following the procedure below.
1
2
FUNCTION
3
4
4
1
or
2
5
SET
6
Dial by any combination of the following methods:
Manual Number Dialing
(UF-788 : Up to 32 stations / UF-744 : Up to 12 stations)
One-Touch Dialing
Abbreviated Dialing
Directory Search Dialing
(For details, see page 45 to 48.)
01
Ex:
(When entering a station for Manual Number Dialing or Directory Search Dialing, press
SET
7
START
If your machine's Transmission Password coincides with the other station's Transmission
Password, your machine starts sending the document.
When transmission is completed, PASSWORD-XMT returns to standard setting (OFF or ON).

Using Password Reception

There is no additional operation required once you set the parameter by following the procedure on the
previous page. The parameter, OFF or ON, cannot be selected for each reception. It is always OFF or ON
until you change the setting.
Password Communications
Set document(s) face down.
8
SET
for OFF (password is not checked)
for ON (password is checked)
after each station is entered.)
DOCUMENT SETAAAAAAAA
ENTER STATION(S) 00%
SELECT MODE (1–5)
ENTER NO. OR
PASSWD–XMT=OFF
1:OFF 2:ON
PASSWD–XMT=OFF
1:OFF 2:ON
or
PASSWD–XMT=ON
1:OFF 2:ON
DOCUMENT SETAAAAAAAA
ENTER STATION(S) 00%
ONE–TOUCH
<01>(Station name)
6
97