Menu Operating Procedure - JVC 1105RYMMDWJEIN Instructions Manual

Menu operating procedure

When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 33).
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
In this section, the operation of the remote control is used for explaining.
Ex.: When setting DIGITAL IN 1 terminal.
Operations
1
To start the setting, press SETTING.
The setting item previously selected can be shown
on the TV screen by pressing SETTING on the front
panel when the receiver is in normal operation
mode.
2
To select the desired submenu, press
5 or ∞ repeatedly.
There are five screens from "SETTING MENU (1)"
to "SETTING MENU (5)." To change the screen,
simply pressing 5 or ∞ repeatedly. You can go to
the next/previous screen.
• On the front panel, turn MULTI JOG.
Button indications on the screen
The buttons for operating the menu are shown on the TV screen. You can operate the menu with these buttons.
SETTING MENU (1)
5
SUBWOOFER
FRONT
CENTER
SURR
S BACK
S BACK
∞
Usable buttons and their functions
SETTING MENU (1)
5
SUBWOOFER
FRONT
CENTER
SURR
S BACK
S BACK
∞
The setting item previously selected
appears.
: NO
SPK : LARGE
SPK : SMALL
SPK : SMALL
SPK : SMALL
OUT : 2SPK
:ENTER :EXIT
On the TV screen
: NO
SPK : LARGE
SPK : SMALL
SPK : SMALL
SPK : SMALL
OUT : 2SPK
:ENTER :EXIT
DIGITAL IN 1
DIGITAL IN 1 :2DVR/DVD3
23:OPERATE
Usable buttons and their functions
CONTINUED ON THE NEXT PAGE
On the display
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
x
The submenu previously
selected appears.
:BACK
ATT
HP
MHz
kHz
27