IBM Power 780 Technical Overview And Introduction page 30

Feature
code
EP9T
EPH2
EPHC
EPHS
EPHT
EPHJ
EPHK
EPHY
EPHZ
16
IBM Power 770 and 780 (9117-MMD, 9179-MHD) Technical Overview and Introduction
Description
90 day temporary on/off processor enablement
0 to 32-core 3.72 GHz POWER7+ processor card:
32-core 3.72 GHz POWER7+ CUoD processor planar containing four
8-core processors. Each processor has 2 MB of L2 cache (256 KB per
core) and 80 MB of L3 cache (10 MB per core). There are 16 DDR3
DIMM slots on the processor planar (eight DIMM slots per processor),
which can be used as CoD memory without activating the processors.
The voltage regulators are included in this feature code.
1-core activation for processor feature FC EPH2:
Each occurrence of this feature will permanently activate one
processor core on Processor Card FC EPH2.
100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EPHS provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH2 for AIX/Linux.
100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EP2P provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH2 for IBM i.
One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/ Off
Processor Core Day Billing features and the client will be charged. One
FC EP27 must be ordered for each billable processor core day of
feature FC EPH2 used by a supported AIX or Linux operating system.
One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/ Off
Processor Core Day Billing features and the client will be charged. One
FC EP29 must be ordered for each billable processor core day of
feature FC EPH2 used by a supported IBM i operating system.
Processor CoD utility billing for FC EPH0, 100 processor-minutes
Processor CoD utility billing for FC EPH0, 100 processor-minutes
OS
support
AIX
IBM i
Linux
AIX
IBM i
Linux
AIX
Linux
IBM i
AIX
Linux
IBM i
AIX
Linux
IBM i
AIX
Linux
IBM i