IBM Power 780 Technical Overview And Introduction page 29

Table 1-6 summarizes the processor feature codes for the Power 780.
Table 1-6 Summary of processor features for the Power 780
Feature Description
code
EPH0 0 to 16-core 4.42 GHz POWER7+ processor card:
16-core 4.42 GHz POWER7+ CUoD processor card containing four
4-core processors. Each processor has 1 MB of L2 cache (256 KB per
core) and 40 MB of L3 cache (4 MB per core). There are 16 DDR3
DIMM slots on the processor planar (8 DIMM slots per processor),
which can be used as capacity on demand (CoD) memory without
activating the processors. The voltage regulators are included in this
feature code.
EPHA 1-core activation for processor feature FC EPH0:
Each occurrence of this feature will permanently activate one
processor core on Processor Card FC EPH0.
EPHN 100 on/off processor days of CoD billing for processor FC EPH0:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EP2L provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH0 for AIX/Linux.
EPHP 100 on/off processor days of CoD billing for processor FC EPH0:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EP2M provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH0 for IBM i.
EPHE One processor day on/off billing for FC EPH0:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/Off Processor
Core Day Billing features and the client will be charged. One FC 5342
must be ordered for each billable processor core day of feature FC
EPH0 used by a supported AIX or Linux operating system.
EPHF One processor day on/off billing for FC EPH0:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/ Off
Processor Core Day Billing features and the client will be charged. One
FC 5343 must be ordered for each billable processor core day of
feature FC EPH0 used by a supported IBM i operating system.
EPHU Processor CoD utility billing for FC EPH0, 100 processor-minutes
EPHV Processor CoD utility billing for FC EPH0, 100 processor-minutes
OS
support
AIX
IBM i
Linux
AIX
IBM i
Linux
AIX
Linux
IBM i
AIX
Linux
IBM i
AIX
Linux
IBM i
Chapter 1. General description
15