JVC UX-T550 Instructions Manual page 6

Speaker cord connection
R
RIGHT
ÓAC IN
—
12V
DC IN
● The speaker grilles can be removed.
● When removing.
1. Insert your fingers at the top and pull towards you.
2. Also pull the bottom towards you.
● Attaching the speaker grille
Connection of external audio units
● Connection with a turntable (or MD player)
R
RIGHT
ÓAC IN
—
12V
DC IN
3
1
L
LEFT
Connect the black cord to the · terminal.
Right speaker (rear side)
Speaker grille
Match the fittings when
attaching the grille.
Signal cord (optional)
L
LEFT R L
Pin-plug x 2
AUX
2 3
Left speaker (rear side)
Speaker cord
RIGHT LEFT
Black
Notes:
● The polarity of the two connected speakers will be the same if the
black speaker cords are connected to the · terminals. If the speak-
ers are connected with polarities reversed, stereo effect and tone will
be degraded.
● The speakers of this unit are not magnetically shielded. When they
are placed directly on or adjacent to a TV, the TV's picture could be
distorted. Install the speakers more than 20 cm away from your TV.
● When connecting the speaker cord make sure that the wire core, not
the insulating cover, is connected to the speaker terminal. Otherwise,
sound cannot be heard.
Turntable (with built-in equalizer) or MD
player (optional)
Pin-plug x 2
Note:
Regarding the connection with external units and their operations,
refer to the instructions provided with those units.
● Connec the cord from the speaker on
the left to the (LEFT) terminal and the
cord from the speaker on the right to
the (RIGHT) terminals.