JVC UX-T550 Instructions Manual page 12

Programmed play (using the remote control unit)
● Up to 20 tracks can be programmed to be played in any required order.
The total playing time of programmed tracks is displayed (up to 99 minutes, 59 seconds).
(Example: When programming the 2nd track to be played first, and the 6th track next, then the 12th track, etc.)
~ Ÿ
C D
@
6
~ Press the CD 3/8 button to set to the CD mode.
Ÿ Press the 7 button.
! Press the PROGRAM button to set to the programming mode.
To confirm the details of a program...
Press the PROGRAM button; the tracks making up the program will be
displayed in programmed order.
PROGRAM
Repeat play (using the remote control unit)
Press the REPEAT button before or during play. A single track or all the
tracks can be repeated.
Whether a single track or all tracks are to be repeated can be specified.
Each time the REPEAT button is pressed, the mode will change from a
single track ( ), to all the tracks (
order.
REPEAT
Single track
9
!
PROGRAM
PROGRAM
2 6
PROGRAM
Track number
2
PROGRAM
Program order number
ALL), to the clear mode, in this
ALL
Goes off.
All tracks
Repeat playback is released.
⁄
To designate the 12th track.
+10 2
2
PROGRAM
The 12th track
⁄ Press to designate the required track number.
@ Designate the remaining tracks by pressing the track number but-
tons.
¤ Press the 3/8 button when programming is completed. Programmed
play starts.
To clear the programmed tracks...
Press the 7 button before playing a CD. During programmed play, press
this button twice. When the CD holder is opened, programmed tracks
are cleared automatically.
Notes:
● If the total playing time of the programmed tracks exceeds 99 min-
utes 59 seconds, the total playing time indication will go out.
● When programming a track number higher than 21 on a disc contain-
ing more than 21 tracks, the total playback time of all the programmed
tracks will not be displayed.
● When a disc with 16 or more tracks is loaded, the "OVER" indicator
will appear.
● Single track repeat (
The current or specified track will be played repeatedly.
● All tracks repeat (
All tracks or the programmed tracks of a CD will be played repeat-
edly.
Random play (using the remote control unit)
Press the RANDOM button, and all tracks on a CD play once in random
order.
To designate the 2nd track.
2
2
PROGRAM
¤
6 12
The total playback time of programmed tracks
is displayed.
)
ALL)
RANDOM
C D