Attaching The Aluminum Chassis; Removing The Antenna; Attaching The Antenna - HYT TC-610 Service Manual

Attaching the Aluminum Chassis

The attaching procedures are contrary with those for removing the chassis.

Removing the Antenna

Rotate the antenna counter-clockwise to remove the antenna. See figure 8.

Attaching the Antenna

1. Insert the threaded end of the antenna into the big threaded port at the top of the radio.
2. Rotate the antenna clockwise until it is fastened. See figure 9.
Figure 7
Figure 8
Figure 9
74
TC-610/620 Service Manual