Disassembly And Assembly For Repair; Removing The Battery; Attaching The Battery - HYT TC-610 Service Manual

Disassembly and Assembly for Repair

Removing the Battery

1. Turn off the radio. Hold the upper side of the radio and press the belt clip until it tilts. Push the battery
latch upwards along the slot of the battery latch at the bottom of the battery, as indicated by the arrow.
See figure 1.
2. Release the battery latch and remove the battery when the bottom of the battery tilts. See figure 2.
Note: To avoid serious abrasion between the extensions at the top of the battery and the slots at the
top of the radio, the angel between the radio unit and the tilting battery must not be too large.

Attaching the Battery

1. Hold the battery and push it towards the top of the aluminum chassis under the belt clip. See figure
3.
Note: Insert the extensions at the top of the battery into the slots at the top of the radio.
2. Press the bottom of the battery until a " click"is heard to fasten the battery on the bottom of the radio.
See figure 4.
Figure 1
Figure 2
Figure 3
72
TC-610/620 Service Manual
(Take TC-610 for example)