Removing The Aluminum Chassis - HYT TC-610 Service Manual

Note: If the battery is not fastened or is still adrift, please remove the battery and install it again.

Removing the Aluminum Chassis

① Remove the two screws at the bottom of the radio.
② Pull out the Volume Control knob and Channel Selector Knob.
③ Unscrew the two fixing nuts with a special instrument.
④ Remove the antenna at the top of the radio. See figure 5.
⑤ Lift the chassis bottom with an instrument and pull out the chassis backwards.
⑥ Remove the rear cover of the radio. See figure 6.
⑦ The disassembled radio is shown as figure 7.
Figure 4
②
④
③
①
Figure 5
⑥
⑤
Figure 6
73
TC-610/620 Service Manual