Sylvania 6842PE Service Manual page 70

3) Earth Ring
Name: Wrist band for preventing Static Electricity
Model name: KS-1059 (Wire type)
Length: 2.7 m
Purpose of Using too:
Protect Circuit Board Damage Caused by Static Electricity
Manufacturer: Kostat
4) Small Driver: Small ceramic driver for level (VR) adjust
5) Dummy Discharge Resistor: 2.4kΩ10W
(2) Measuring Devices
1) Oscilloscope: 500MHz sampling
2) Probe: 10:1
3) Digital Multi-meter
4) Signal Generator: LT447/LT448 (Manufacturer: LEADER ELECTRONICS CORP.) or similar one
6. How to connect / disconnect the FFC and TCP to connectors
(1) How to Disconnect TCP
1. Flip over the cover of connector carefully.
2. Take out the film of TCP from the slot carefully.
(2) How to Connect TCP
1. Insert TCP film to the slot carefully. Please be sure that the TCP and connector are correctly aligned to each
other.
2. Push the cover until "Tick" sounds.
Caution:
1. It is highly recommended to blow out any dust in a connector slot before re-connect a TCP.
2. When you touch the TCP, beware of electrostatic discharge.
TCP Connection
Cover of connector
2-1-4
Film of TCP
L0604DCP