Assembly - Pro-Form 725 proform Model No. 831.297780 User Manual

1. Refer to the drawing on page 4 and identify the left
side of the treadmill. With the help of a second person,
carefully lay the treadmill on its left side.
Firmly slide an Extension Leg (99) into each side of the
Base (70) as shown. Make sure that the Extension Legs
are turned so the Base Pads (89) are on the indicated
sides. Using the included Allen Wrench (92), attach each
Extension Leg with an Extension Screw (93).
With the help of a second person, carefully raise the
treadmill to the vertical position so both Extension Legs
(99) are resting flat on the floor.
3. See HOW TO LOWER THE TREADMILL FOR USE on
page 21. Follow the instructions on page 21 to lower the
treadmill.
Cut the two shipping ties from the Right and Left
Handrails (72, 73).
5