Adding A Track To A Group - Entry Gr; Dividing A Group - Divide Gr - JVC UX-F70MD Instructions Manual

Adding a Track to a Group — ENTRY GR
This function allows you to enter a track into a group. The
track will be added as the last track in the selected group.
The track numbers will be renumbered.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
Insert an MD to edit.
2
Press MD TITLE INPUT/EDIT repeatedly while
pressing MD GROUP to select "ENTRY GR?"
The source changes to "MD."
• Each time you press MD TITLE INPUT/EDIT while
pressing MD GROUP, the group editing mode
changes as follows:
GR 1 TITLE? FORM GR?
Canceled
ERASE GR?
UNGR ALL? UNGROUP?
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• During playback:
The current track number starts flashing.
4
Press ¢ or 4 to select a track you want to add
to a group.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
5
6
7
ENTRY GR?
8
DIVIDE GR?
JOIN GR?
MOVE GR?
Dividing a Group — DIVIDE GR
This function allows you to divide one group into two
separate groups.
You cannot divide the group containing a single track.
When the original group has a title, two separate groups are
reassigned the same title as the original group.
Once a new group is divided, the other groups are renumbered.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
– 44 –
Press SET.
• To cancel the setting, press CANCEL, then repeat
step 4 .
Press ¢ or 4 to select a group.
• During playback:
The tracks in the selected group is played back
repeatedly.
Press SET.
"<ENTRY GR>" appears on the display.
• If the track is already in a group, "CANNOT
ENTRY!" appears on the display.
• To cancel the setting, press CANCEL, then repeat
step 4 .
Press ENTER to finish the editing procedure.
"EDITING" then "UTOCwriting" appears on the
display while the editing you have made is being
recorded on the MD.
Insert an MD to edit.
Continued