Basic Cd Operations; Programing The Playing Order Of The Tracks - Program Play - JVC UX-F70MD Instructions Manual

To stop during play, press 7.
The following informations appear.
CD indicator
Total track number
To remove the disc, press CD open/close 0.

Basic CD Operations

While playing a CD, you can do the following operations.
To stop playback for a moment
Press CD 3 / 8.
The elapsed playing time starts flashing on the display.
To resume playback, press CD 3 / 8 again.
To locate a particular point in a track during play
Press and hold ¢ or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
To go to another track
Press ¢ or 4 repeatedly.
• ¢ : Skips to the beginning of the next or succeeding
tracks.
• 4 : Goes back to the beginning of the current or
previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To check the clock time while playing back CD
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the disc informations and
the clock time alternate on the display.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load a CD.
2
Total playing time
Press CD 3 / 8, then 7.
The source is changed to "CD."
3
Press PLAY MODE repeatedly until "PROGRAM"
appears on the display.
• Each time you press the button, play mode changes
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see "To go to
5
Press CD 3 / 8.
The tracks are played in the order you have programed.
The Program play ends when all the tracks are played
once.
To stop during play, press 7.
To exit from Program play mode, press PLAY MODE
repeatedly so that the unit enters another playback mode
(Random play or Normal play mode) before or after play.
– 19 –
as follows:
PROGRAM
(Program play)
Normal play
another track directly using the number buttons" to
the left.
The current track
CD indicator
RANDOM
(Random play)
Program No.
Total playing
time
Play mode