Adding Or Replacing System Memory - TAG SV-2001-THS Operation Manual

Operations Manual

6.8 Adding or Replacing System Memory

Document Number: 273-MNL-001
model. To remove the cover, use a Phillips
screwdriver to remove all screws from the
sides and top of the cover.
NOTE: It is important to make note of the
location from which screws are removed
since different screw lengths may be used
to secure the cover.
CAUTION
It is not safe to operate TAG Computers
without the cover in place. Failure to take
this precaution may result in personal
injury and system damage.
This section lists the procedures for adding or
replacing system memory.
WARNING
Ensure that the system is powered-down
and all power sources have been
disconnected from the Computer prior to
removing or replacing system memory.
Failure to do so could result in serious
injury from electrical shock.
CAUTION
Printed circuit boards and hard drives
contain electronic components that are
extremely sensitive to static electricity.
Ordinary amounts of static from your
clothes or the work environment can
destroy components. Do not touch the
components or any metal parts without
taking proper antistatic precautions.
SV-2001-THS Computer
Version A. 08/25/2010
Page 54 of 58