Table of Contents
Advertisement
6.5 Power Supply Cable Retention Bracket Installation
____1.0 :Initial Check Points
____2.0 Install AC Retainer
Bracket:
Document Number: 273-MNL-001
Figure 6-32
SV-2001-THS
SV-2001-THS Computer
bare metal surface on your workbench, or
other grounded object before handing DIMMs
or other components.
Before working with computer components,
follow these guidelines:
1. Avoid static-causing surfaces such as carpeted
floors, plastic, and packing foam.
2. Remove components from their antistatic bags
only when you are ready to use them. Do not
lay components on the outside of antistatic
bags because only the inside of the bags
provide electrostatic protection. Always hold
memory modules and components by their
edges or their metal mounting brackets.
3. Avoid touching the edge connectors and
components on the cards. Never slide memory
modules or components over any surface.
____1.1
VERIFY the Work Permit instructions
have been completed.
____1.2
VERIFY locks and tags are properly
attached to equipment.
____1.3
VERIFY all power is removed from
the Computer.
____2.1
SV-2001-THS-Computer. (Figure 6-
32).
Computer (Rear View)
Version A. 08/25/2010
Operations Manual
Page 51 of 58
Advertisement
Table of Contents
