Table of Contents
Advertisement
Operations Manual
6 Procedures
6.1 Computer Startup
6.2 Computer Shutdown
6.3 TAG Approved BIOS
Document Number: 273-MNL-001
The procedures within this Chapter contain
relevant information to ensure your SV-2001-
THS Computer maintains its maximum
performance potential.
1. Check to make sure that all the cables are
seated and connected correctly to the back of
the unit such as keyboard, mouse, monitor
video and power cables.
2. Press ON hard power ON/OFF switch at rear
of computer. (Figure 5.3).
3. Then Press the power switch ON to start the
computer (power switch is located in the front
of the unit). (Figure 5.2).
4. Once the unit starts, System will go thru Power
On self Test (POST) (no action is required at
this time).
5. Type in the correct user name and password
and then press enter to login.
6. Once the operator is logged on they can use
the computer as they wish.
NOTE: These instructions are assuming the
Computer is not connected to any network.
1. Save any data that is needed and then close
application
2. Once all data is saved and applications are
closed it is now safe to shut down the
computer.
The BIOS (basic input/output system) is the
program stored on the CMOS that the
Computer's microprocessor uses to get the
SV-2001-THS Computer
Version A. 08/25/2010
Page 30 of 58
Advertisement
Table of Contents
