Sony STR-DA5300ES Service Manual page 17

Remote commander
You can use the supplied remote RM-AAL009 to
operate the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
RM-AAL009
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/video
standby) components that the remote is assigned to
operate.
If you press the ?/1 (B) at the same time,
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
Note
The function of the AV?/1 switch
changes automatically each time you
press the input button (C).
B ?/1 (on/
Press to turn the receiver on or off.
standby) If ZONE 2 or ZONE 3 is selected, only
the main receiver is turned on or off with
this button. To turn off all components
including an amplifier in zone 2 or zone 3,
press ?/1 and AV?/1 (A) at the same
time (SYSTEM STANDBY).
Saving the power in standby
mode.
When "HDMI Control" and "RS-232C
Control" are set to "OFF."
C Input
Press one of the buttons to select the
buttons component you want to use. Press a
pink-labeled button after pressing SHIFT
(wj). When you press any of the input
buttons, the receiver turns on. The buttons
are factory assigned to control Sony
components. You can program the remote
to control non-Sony components
following the steps in "Programming the
remote".
D ZONE 2
Press to enable the zone 2 or zone 3
ZONE 3
operation.
E AMP
Press to enable the receiver operation.
F MUSIC
Press to select sound field.
Name Function
G MOVIE
Press to select sound field.
H Numeric
Press to
− preset/tune to preset stations.
buttons
− select track numbers of the CD player,
DVD player, Blu-ray Disc Player or
MD deck. Press 0/10 to select track
number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
I ENTER
Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
MEMORY
Press to store a station during tuner
operation.
J AMP MENU Press to display the menu to operate the
receiver.
K
Press V/v/B/b to select the menu items.
Then press to enter the selection.
V/v/B/b
L OPTIONS
Press to display and select items from
option menus for receiver and DVD
player, Blu-ray Disc Player.
TOOLS
Press to display and select items from the
option menus for DVD player or Blu-ray
Disc Player, etc.
M MENU
Press to display the menu to operate the
audio/video components.
SCREEN/ Press SHIFT (wj), then press MENU to
DSPL switch the display mode of the menu
CONTROL
between SCREEN (to display the menu
on the TV screen) and DSPL (to display
the menu in the display window).
N B·/·b
Press to select the album.
O m/M
Press to operate the DVD player, Blu-ray
a)
x Disc Player, CD player, MD deck, tape
a)
X
deck, or component connected to the
a) b)
H
DIGITAL MEDIA PORT adapter etc.
a)
./>
TUNING +/– Press to select station.
P PRESET
Press to register FM/AM Radio station or
b)
+ /– to select preset stations.
TV CH +/– Press TV (wk), then press TV CH+/− to
operate the TV, satellite tuner, VCR, etc.
Q F1/F2
Press TV (wk), then press F1 or F2 to
select a component to operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc Player
F2: VHS
MACRO1,
Press AMP (5), then press MACRO 1
MACRO2 or MACRO 2 to set up the macro function.
TV/INPUT
Press TV/INPUT and TV (wk) at the
same time to select the input signal (TV
input or video input).
WIDE
Press repeatedly to select the wide picture
mode.
PIP Press SHIFT (wj), then press PIP to
switch the image of the PIP (Picture in
Picture) window. The image will be
changed as follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You can swap
the position of the main screen and the
PIP window (swap) by pressing the
(qa). You can expand or shrink the
window using V/v (qa). You can also
change the window's position using B/b
(qa).
Note
The HDMI video signals are not output
while the PIP window is displayed.
RESOLUTION Press SHIFT (wj), then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT VIDEO
MONITOR OUT jack.
STR-DA5300ES
Name Function
R DVD/
Press to display the menus of the DVD
TOP MENU, player on the TV screen. Then use
MENU V/v/B/b and
to perform a menu
operations.
NIGHT
Press AMP (5), then press NIGHT
MODE MODE to activate the NIGHT MODE
function.
INPUT Press AMP (5), then press INPUT
MODE MODE to select the input mode when
the same components are connected to
both digital and analog jacks.
SLEEP
Press SHIFT (wj), then press SLEEP to
activate the sleep timer function and the
duration which the receiver turns off.
TEST TONE Press SHIFT (wj), then press TEST
TONE to output the test tone from each
speaker.
S MUTING
Press to turn off the sound temporarily.
Press the button again to restore the
sound.
T MASTER
Press to adjust the volume level of all
VOL +/–
speakers at the same time.
TV VOL +/–
Press TV (wk), then press TV VOL +/−
to adjust the volume level of the TV.
U DISC SKIP
Press to skip a disc when using a
multi-disc changer.
V RETURN/
Press to return to the previous menu or
EXIT O
exit the menu while the menu or on-screen
menu or on-screen guide of the VCR,
DVD player, or satellite tuner is displayed
displayed on the TV screen.
W DISPLAY
Press to select information displayed in
the display window, TV screen of the
VCR, satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or MD deck.
Note
In the SCREEN mode, press the button to
display the menu on the TV screen.
X CLEAR
Press to
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc.
of the satellite tuner or DVD player.
>10 Press to select
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
D.TUNING Press to enter direct tuning mode.
Y 2CH/
Press to select sound field or to switch
A.DIRECT the audio of the selected input to analog
signal without any adjustment.
Z A.F.D.
Press to select sound field.
wj SHIFT Press to light up the button. It changes
the remote button function to activate
the buttons with pink printing.
wk TV Press to enable the TV operation.
wl RM SET UP Press to set up the remote.
a)
See the table for information on the buttons that you can
use to control each component.
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Notes
•Some functions explained in this section may not work
depending on the model.
•The above explanation is intended to serve as an example
only. Therefore, depending on the component, the above
operation may not be possible or may operate differently
than described.
17