Reset To Factory Defaults - Simrad RS90 Operating Manual

16
Hi
DSC
MENU SELECT
PRI
AIS SETUP
GPS SIM
HS SETTING
RESET
USA
16
Hi
DSC
RESET RADIO
PRI
ARE YOU SURE
YES
NO
USA
16
Hi
DSC
C
MENU SELECT
WAYPOINT
N2K DATA
BACKLIGHT
BUDDY LIST
USA
16
Hi
DSC
C
BACKLIGHT
LEVEL
N2K GROUP
USA
16
Hi
DSC
C
BACKLIGHT
LO HI
PRESS OK
USA
98 |

Reset to factory defaults

This option returns every setting in the RS90 to factory default
values.
However, MMSI settings and entries in your buddy list are preserved.
1. Select MENU → RESET.
2.
Select YES to confirm and reset the radio, or NO to exit without
resetting.
Backlight level
This option sets the brightness of the LCD screen and keypad.
1. Select MENU → BACKLIGHT → LEVEL.
2. Use the ▲ and ▼ keys to set the level required.
3.
Press [OK] to enable the setting and return to the menu.
¼ Notes
•
The DISTRESS key backlight cannot be turned down.
•
If the backlight setting is set to level 0 (off), the backlight will
automatically turn ON at level 1 if the radio detects any DSC activity,
or any buttons are pressed. The backlight will return to level 0 (off)
after 10 seconds of inactivity.
Setup | RS90 Operating Manual