Simrad RS90 Operating Manual page 22

22 |
Switching on a wireless handset
•
Press and hold [X] until the display illuminates.
The display shows "Searching, " then "Connecting, " and then the
current operating screen.
¼ Notes:
•
This only switches on the individual wireless handset, not the
transceiver.
•
If the transceiver is off, the wireless handset continues to display
"Searching."
•
At install time, wireless handsets must be subscribed. See
"Subscribing a wireless handset" on page 74.
Switching off a wireless handset
¼ Note:
This procedure only switches off the wireless handset. It does
not switch off any other handsets or the transceiver.
1.
Press and hold [X] until the following message appears:
"Release key to power off."
2.
Release the [X] key.
Handset status display
A small icon located on the lower right of the screen shows the
status of all connected handsets.
The above example shows that handset 1 and handset 3 are online
and this handset is handset 1.
Getting started | RS90 Operating Manual