Sony MSW-M2100 Operation Manual page 99

Item number Item name
703 BLANK LINE SELECT
Sub-Item
0 ALL LINE
In 525-line 12 ... LINE 12 ... LINE
mode 19 19
20 LINE 20
9 ... LINE 9 ... LINE 22 Specify blanking for lines 9 to 22.
In 625-line
mode 22
23 LINE 23
705 EDGE SUBCARRIER
REDUCER MODE
707 FORCED VERTICAL
INTERPOLATION OFF
709 CAV LEVEL FORMAT
Sub-Item
1 OUTPUT CAV
LEVEL
a) The "Y-add" function is a circuit operation to interpolate
the video signal vertically during jog or variable speed
playback for the purpose of reducing the vertical
movement of the playback picture.
Menu items in the range 700 to 799, relating to video control
Settings
Switch blanking on or off for individual lines in the vertical blanking interval. The
Y/C signal and odd/even fields are blanked simultaneously.
Note
For playback of an analog Betacam cassette (Betacam SP, etc.) regardless of the
setting of this item, the chrominance signal is blanked up to line 15.
- - - : Specify the blanking for each line separately.
BLANK: Regardless of the setting of other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting of other sub-items, switch off blanking for all
lines which can be specified in this menu item.
Specify blanking for lines 12 to 19.
BLANK : Carry out blanking.
THROU: Switch off blanking.
Specify blanking for lines 20.
BLANK : Carry out blanking.
HALF: Carry out half-blanking.
THROU: Switch off blanking.
BLANK : Carry out blanking.
THROU: Switch off blanking.
Specify blanking for line 23.
HALF : Carry out half-blanking.
THROU: Switch off blanking.
During playback of a composite signal, in the playback circuit the edge subcarrier
reducer (ESR) is automatically switched on or off according to the VTR
operation. When recording a "Non-Standard" signal, for example, if the color
edges are not as good as with a proper signal, the ESR can be forced on. This
item makes this selection.
AUTO : ESR is switched on and off automatically.
on: ESR operation is forced on.
The "Y-add" a) function is normally switched on automatically during jog or variable
speed playback. This item selects whether or not to force the "Y-add" function
off.
AUTO : Automatically switch the "Y-add" function on.
off: Force the "Y-add" function off.
Select whether the analog component output should be D-1 or Betacam.
(Selectable only in 525-line mode)
Format Color bars
D-1 CAV 100/0/100/0
Betacam 100/7.5/77/7.5 714 mV
Select the analog component output format.
B-CAM : Betacam
D1: D-1
Y video Y sync
700 mV 300 mV
286 mV
Chapter 11 Setup Menus
R–Y/B–Y
700 mV
700 mV
(Continued)
11-17