Sony MSW-M2100 Operation Manual page 118

Processor adjustment range
Video level ±3 dB/ –∞ to +3 dB selectable
Chroma level ±3 dB/ –∞ to +3 dB selectable
Setup level (MSW-M2100/M2100E)
±30 IRE
Black level (MSW-M2100P/M2100EP)
±210 mV
Y/C delay ±100 ns (in analog Betacam
playback)
Chroma phase ±30°
System phase Sync: ±15 µs
SC: ±200 ns
Input connectors
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75 Ω, sync negative
Output connectors
SDI OUTPUT BNC (3 including 1 for character
superimposition)
Serial digital (270 Mbits/ s)
SMPTE 259 M/ITU-R BT.656
SDTI-CP OUTPUT
BNC (2)
SMPTE 326M
COMPONENT VIDEO OUTPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75 Ω, with
100% color bar for MSW-
M2100P/M2100EP and with
100% or 75% color bar selectable
for MSW-M2100/M2100E
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75 Ω, Sync negative
AUDIO OUTPUT CH1/2/3/4
XLR 3-pin, male (4)
+4 dBm at 600 Ω load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, 3/4, 5/6, 7/8
BNC (4)
Complies with AES-3id-1995
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600 Ω load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES JM-60 stereo phone jack
–∞ to –12 dBu at 8 Ω load,
unbalanced
CUE OUT XLR 3-pin, male
+4 dBm at 600 Ω load, low
impedance, balanced
Input/output connector (MSW-M2100/
M2100EP only)
Ethernet • 1000Base-T (conforms to the
IEEE802.3ab)
• 100Base-TX (conforms to the
IEEE802.3u)
• 10Base-T (conforms to the
IEEE802.3i)
(Automatically determined by Auto
Negotiation function)
Remote connectors
CONTROL PANEL
10-pin (2), female
Front/rear selectable
REMOTE 1-IN(9P)
D-sub 9-pin, female
REMOTE 1-OUT(9P)
D-sub 9-pin, female
RS-232C D-sub 9-pin, male
VIDEO CONTROL
D-sub 15-pin, male (for optional
BVR-50/50P)
REMOTE 2 PARALLEL I/O(50P)
50-pin, female
A-5
Appendix