Error Codes On Transmission And Reception - Toshiba e-studio2050c Troubleshooting Manual

7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error
Code
Not authorized to store a file
4312
Not authorized to store in e-Filing
4313
Not authorized to send a Fax/iFax The user has not been authorized to perform this
4314
Not authorized to perform printing
4321
in the specified setting
Image data generation failure
4411
Double-sign encoding error
4412
Font download failure
4611
Font download failure
4612
Font download failure
4613
4621 Downloaded font deletion failure
Print failure
4F10

Error codes on transmission and reception

Error
Code
0012 Original misfeed
0013 Door open
0020 Power interruption
Interruption by paper misfeeds
0030
during direct transmission
Polling Error
0033
Memory full
0042
0050 Line busy
0051 Fax line cable disconnected
Security Mismatch in Relay or
0053
Mail Box transmission
00B0- Signal Error or Line Condition
00B5
Error
00C0-
00C4
00D0-
00D2
Problem Description
Problem Description
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Corrective Action
The user has not been authorized to perform this
operation. Ask your administrator.
The user has not been authorized to perform this
operation. Ask your administrator.
operation. Ask your administrator.
The user has not been authorized to perform this
operation. Ask your administrator.
Check if the file to be printed is broken. Perform printing
again or use another printer driver.
A double-sign encoding error occurred because the PDF
file is encrypted in unsupported script. Printing the file in
this function is impossible.
Since the available number of fonts is exceeded, the font
cannot be registered. Delete at least one font.
Since there is no space in HDD, the font cannot be
registered. Delete at least one font.
Since an error has occurred, the font cannot be registered.
Perform downloading again or regenerate the font data
first.
Check if the font to be deleted is registered.
If the error still persists after reattempting, turn the power
OFF and then back ON. Then make another effort. If the
error still persists, contact your service representative.
Corrective Action
Remove the misfed original.
Firmly close the open door.
Check the power interruption report.
Remove the misfed paper and reattempt the transmission.
Check polling options setup (Security Code, etc.), and
check whether the polling document exists.
Make sure that there is sufficient memory before making
the call again.
Reattempt the communications.
Check if the fax line cable is connected. To clear the
message, press the [FUNCTION CLEAR] button twice.
Confirm the remote party's Security Code, system
password and your setup.
Reattempt the communications.
Error Codes 111