System Battery Replacement - HP ProLiant DL320e Gen8 v2 User Manual

Hide thumbs Also See for ProLiant DL320e Gen8 v2:
Table of Contents

Advertisement

System battery replacement

If the server no longer automatically displays the correct date and time, then replace the battery that provides
power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 14).
1.
Remove the power from the server:
2.
Disconnect the power cord from the power source.
a.
Disconnect the power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 14).
o
Remove the server from the rack (on page 16).
o
Remove the access panel (on page 17).
4.
Remove the air baffle (on page 18).
5.
Locate the battery on the system board
6.
Remove the battery.
7.
The computer contains an internal lithium manganese dioxide, a vanadium
("System board
components" on page 9).
System battery replacement 80

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents