Led Table - DirecTV GenieGO Gen 1 Installation Manual

DIRECTV GenieGO
TM
GenieGO (gen 2) LED Table
GenieGO Gen2
Issue
Single LED
Off No Power
Slow Blinking blue Bootup sequence
Fast Blinking blue Bootup sequence
Red Defective unit
White Firmware update *
Amber Network/Headend connection issue Internet connection issue� Verify network connections�
Blinking Amber Network/Headwend (NS)
Communication Issue
Purple No HD-DVRs detected
Blue Normal Operation
Green Restoring factory defaults
* Firmware Update
The GenieGO (gen 2) LED turns white when the firmware update is in process.
Action
Check the power connection�
This is the bootup sequence� No action required�
This is the bootup sequence� No action required�
The customer needs to replace GenieGO�
GenieGO is getting a firmware update. No action required. let the
GenieGO complete the Update.
Internet connection issue� Verify network connections
Verify network connections and installation (this includes GenieGO and
HD-DVRs)�
No action required�
Warning period before restoring factory defaults (press reset button > 10
seconds)

LED Table

6 6
Gen 2