Icom IC-F51V Instruction Manual page 15

TALK AROUND KEY
Push to turn the talk around functon ON and OFF.
• The talk around functon equalzes the transmt frequency to the re-
ceve frequency for transcever-to-transcever communcaton.
WIDE/NARROW KEY
Push to toggle the IF bandwdth between wde and narrow.
• The wde passband wdth can be selected from 25.0 or 20.0 kHz
usng the CS-F50V
DTMF AUTODIAL KEY
➥ Push to enter the DTMF channel selecton mode. Then select
the desred DTMF channel usng [CH Up]/[CH Down].
➥ After selectng the DTMF channel, push agan to transmt the
selected DTMF code.
DTMF RE-DIAL KEY
Push to transmt the last-transmtted DTMF code.
• TX memores are cleared after turnng the transcever OFF.
CALL KEYS
Push to transmt a 5-tone/BIIS ID code.
• Call transmsson s necessary before callng another staton depend-
ng on your sgnallng system.
• [Call A] and/or [Call B] may be avalable when your system employs
selectve 'Indvdual/Group' calls. Ask your dealer whch call s as-
sgned to each key.
SURVEILLANCE KEY
Push to turn the survellance functon ON or OFF.
When ths functon s turned ON, the beep s not emtted and the
LCD backlght and the LED ndcator do not lght when a sgnal s
receved or a key s pushed.
cloning software
PANEL DESCRIPTION
. Ask your dealer for detals.
2
2
11