Icom IC-F51V Instruction Manual page 14

2
PANEL DESCRIPTION
MONITOR KEY
Actvates one of (or two of) the followng functons on each chan-
nel ndependently:
• Push and hold to un-mute the channel (audo s emtted; 'Audble'
condton).
• Push to mute the channel (sets to 'Inaudble' only).
• Push after the communcaton s finshed to send a 'reset code'. (BIIS
operaton only)
NOTE: The un-mute condton ('Audble' condton) may auto-
matcally return to the mute condton ('Inaudble' condton)
after a specfied perod.
LIGHT KEY
Push to turn the backlght ON for about 5 sec. even f the backlght
functon s turned OFF n user set mode.
LONE WORKER KEY
Push to turn the Lone Worker functon ON or OFF.
• If the Lone Worker functon s actvated, the Emergency functon s
automatcally turned ON after the specfied tme perod has passed
wth no operaton s performed.
HIGH/LOW KEY
Push to select the transmt output power temporarly or perma-
nently, dependng on the pre-settng.
• Ask your dealer for the output power level for each selecton.
C.TONE CHANNEL ENTER KEY
Push to enter the contnuous tone channel selecton mode, and
push [CH Up]/[CH Down] to change the tone frequency/code set-
tng. The selected channel remans set as the contnuous tone
channel untl another channel s desgnated as such.
10