Af Micro Adj; Disp. Cont. Af Area - Sony ILCE-5100 User Manual

AF Micro Adj.

Allows you to adjust and register an autofocused position for each lens, when using an A-
mount lens with the Mount Adaptor LA-EA2 or LA-EA4 (sold separately).
1. Select MENU →
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. Selecting a positive value shifts the
autofocused position away from the product. Selecting a negative value shifts the
autofocused position closer to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered
value appears on the screen. [±0] appears for lenses for which a value has not yet been
registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered and no new
lens can be registered. To register a new lens, attach a lens for which the registration can
be erased, and set its value to [±0], or reset the values of all the lenses using [Clear].
If you perform [AF Micro Adj.] with lenses other than Sony, Minolta, or Konica-Minolta
lenses, the registered settings for Sony, Minolta, or Konica-Minolta lenses may be
affected. Do not perform [AF Micro Adj.] with an unsupported lens.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-Minolta lens of
the same specification.
[70] How to Use

Disp. cont. AF area

You can set whether or not to display the focus area that is in focus when [Focus Area] is
set to [Wide] or [Zone] and [Focus Mode] is set to [Continuous AF].
1. MENU →
Menu item details
(Custom Settings) → [AF Micro Adj.].
Using shooting functions
(Custom Settings) → [Disp. cont. AF area] → desired setting.
Adjusting the focus