Shot. Result Preview - Sony ILCE-5100 User Manual

the actual picture will differ from the image you were viewing prior to shooting.
While you press and hold the key to which you assigned the [Aperture Preview] function, the
aperture is stepped down to the set aperture value and you can check the blurriness prior to
shooting.
1. MENU →
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Aperture Preview] was assigned.
Hint
Although you can change the aperture value during the preview, the subject may be
defocused if you select a brighter aperture. We recommend that you adjust the focus
again.
Note
You cannot set the [Aperture Preview] function to [Left Button], [Right Button] or [Down
Button].
[135] How to Use

Shot. Result Preview

With the monitor, you may see an image with an aperture that differs from the shooting
result. Since the blurring of a subject changes if the aperture is changed, the blurriness of
the actual picture will differ from the image you were viewing prior to shooting. While
pressing down the key to which [Shot. Result Preview] is assigned, you can check the image
preview with the DRO, shutter speed, aperture and ISO sensitivity settings applied. Check
the shooting result preview before shooting.
1. MENU →
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Shot. Result Preview] was assigned.
Hint
The DRO settings, shutter speed, aperture and ISO sensitivity settings you have set are
reflected on the image for [Shot. Result Preview], but some effects cannot be previewed
depending on the shooting settings. Even in that case, the settings you have selected will
be applied to the images you shoot.
(Custom Settings) → [Custom Key Settings] → set the [Aperture
Using shooting functions
(Custom Settings) → [Custom Key Settings] → set the [Shot. Result
Setting the other functions of this product