Download Print this page
Sony ILCE-6400 Service Manual

Sony ILCE-6400 Service Manual

Interchangeable lens digital camera
Hide thumbs Also See for ILCE-6400:

Advertisement

Quick Links

2019/01/30 02:39:50 (GMT+09:00)
SERVICE MANUAL
Ver. 1.0 2019.01
LEVEL 2
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
[About the service of this model]
ILCE-6400L/6400M is commodity that packed the Interchangeable Lens Digital Camera and Interchangeable Lens.
Refer to each following service manual the Interchangeable Lens kit, when you repair.
Model
ILCE-6400
No supplied lens
ILCE-6400L
SELP1650 (E PZ 16-50mm F3.5-5.6 OSS)
ILCE-6400M
SEL18135 (E 18-135mm F3.5-5.6 OSS)
Conditions of Use:
(1)
Please use this information only for the purpose of performing repair, maintenance and/or confi guration services of the Sony products (hereinafter the "Repair services") under the
service agreement entered into with the Sony group company (hereinafter the "Service agreement"). Using this information for any purpose other than the purpose described foregoing
is forbidden.
(2)
Only the Authorized Servicer's offi cers, employees or subcontractors (including their offi cers and employees) whose duties justify a need-to-know and who have agreed to hold
confi dential this information (collectively hereinafter the "Permitted users") are permitted to access and use this information. To disclose or disseminate to any person other than the
Permitted users is forbidden.
(3)
Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose described in Section (1) above.
(4)
Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5)
Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
somk-gcs-tissnexim-adm@jp.sony.com
(6)
In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confi rm that this information is up-to-date before using it.
9-896-854-31
2019A33-1
©
Sony Imaging Products & Solutions Inc.
2019.01
Photo: ILCE-6400 (Main body)/BLACK
Lens
INTERCHANGEABLE LENS DIGITAL CAMERA
ILCE-6400/6400L/
Service Manual of Lens
No supplied lens
9-834-693-1[]
9-896-833-1[]
6400M
US Model
Canadian Model
AEP Model
UK Model
E Model
Indian Model
Chinese Model
Korea Model
Tourist Model
SYS SET

Advertisement

loading

Summary of Contents for Sony ILCE-6400

  • Page 1 Conditions of Use: Please use this information only for the purpose of performing repair, maintenance and/or confi guration services of the Sony products (hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service agreement”). Using this information for any purpose other than the purpose described foregoing is forbidden.
  • Page 2 SPECIFICATIONS [Recording format] Camera File format [System] JPEG (DCF Ver. 2.0, Exif Ver. 2.31, MPF Baseline) compliant, RAW (Sony ARW 2.3 format) Camera Type Movie (XAVC S format) Interchangeable Lens Digital Camera MPEG-4 AVC/H.264 XAVC S ver.1.0 format compliant Video: MPEG-4 AVC/H.264...
  • Page 3 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
  • Page 4 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 1. SERVICE NOTE 1-1. PRECAUTION ON REPLACING THE Update of MAC Address and Device Address SY-1094 BOARD When a board that contains Wi-Fi and Bluetooth has been replaced or when replacing a board that contains the main IC (CPU), the IC’s unique number (MAC address and device address) must be reloaded.
  • Page 5 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 1-2. PRECAUTION FOR REPLACEMENT 1-3. CHECKING THE Wi-Fi FUNCTION OF THE MECHA DEVICE SERVICE Perform the following procedure to check the Wi-Fi function. (IMAGER) Required equipment: Windows personal computer with Wi-Fi Capture the data to PC from CD-ROM supplied with the mecha interface device service when it is ordered.
  • Page 6 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2. DISASSEMBLY & ASSEMBLY OPERATION NOTES DISCHARGING OF THE CHARGING CA- Make sure that the conductive side of a flexible board does not have any stain or foreign materials. Note: High-voltage cautions PACITOR FOR THE FLASH Do not touch the conductive side of flexible boards with bare hands.
  • Page 7 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-1. CONSTITUTION DIAGRAM cabinet (rear) block LC panel block SY heat sink block SY-1094 board block shoe block SY base block cabinet (upper) block JK-1024 flexible board VF block BT block IM imager unit MB charge unit shutter unit (AFE-3032)
  • Page 8 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2. DISASSEMBLY • Disassembled in the order shown in the fl owchart below. 2-2-1. DISASSEMBLY FLOW MAIN UNIT 2-2-2. CABINET (REAR) BLOCK 2-2-17. CABINET (UPPER) BLOCK (Page 2-4) (Page 2-16) 2-2-3. LC PANEL BLOCK 2-2-9. HINGE FPC COVER1 PLATE 2-2-18.
  • Page 9 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M Note: Disassemble in the order indicated by the numbers assigned to the parts in the fi gures such as 1. 2-2-2. CABINET (REAR) BLOCK 6 diopter adjust dial sheet Note: Diopter adjust dial sheet cannot be reused. Be sure to replace them with new parts.
  • Page 10 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-3. LC PANEL BLOCK 2 hook 2 hook 1 Peel off the LC-1042 flexible board. – Front view – 4 Draw the LC-1042 flexible board out of the hole. 5 LC panel block 3 four screws (M1.7 2.5)
  • Page 11 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-4. REAR FRAME BLOCK top side 1 four screws (M1.7 2.5) rear side top side 3 two screws (M1.7 2.5) 4 claw 2 two tapping screws (1.7 6 yoke magnet holder block front side 5 rear frame block...
  • Page 12 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-5. REC BUTTON PLATE 6 Slide the REC button plate 7 rib in the direction of the arrow. 4 tapping screw (1.7 5 rib top side 2 rib 8 rib 1 tapping screw (1.7 3 rear flame cover...
  • Page 13 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-7. CONTROL SWITCH BLOCK 1 flexible board. 2 rib top side 3 two claws – Rear view – 4 control switch block rear side 2-2-8. RS-1013 FLEXIBLE BOARD 1 FP protection sheet (C) 2 Peel off the RS-1013 flexible board.
  • Page 14 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-9. HINGE FPC COVER1 PLATE front side 1 Push up the hinge FPC cover1 plate from the hole on the back. bottom side 5 Open the hinge FPC cover1 plate in the direction of the arrow. 4 two claws...
  • Page 15 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-10. HINGE FPC COVER2 PLATE 1 Push up the hinge FPC cover2 plate from the hole on the back. front side 2 two bosses 4 two claws bottom side 3 Slide the hinge FPC cover2 plate in the direction of the arrow.
  • Page 16 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-11. LC CABNET REAR BLOCK 2 two screws (M1.4 1.4) front side 1 two screws (M1.4 1.4) bottom side 5 two claws 3 two screws (M1.4 4 claw 6 claw 7 LC cabnet rear block 6 claw 2-11...
  • Page 17 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-12. LC INNER BLOCK front side 2 claw 3 claw 2 claw 5 LC inner block 4 Draw the LC-1042 flexible board out of the hole. 1 four claws bottom side 2-12 SYS SET...
  • Page 18 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-13. LCD BLOCK ASSY front side 2 LCD flexible board bottom side 1 BL flexible board 5 Lift up the LC hinge block. 3 claw 6 Draw the flexible board out of the hole. 4 two claws 7 LCD block assy 2-13 SYS SET...
  • Page 19 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-14. LC-1045 BOARD 1 Peel off the LC FPC protection sheet. 4 Peel off the LC-1045 board. 3 Draw the LC-1042 flexible board out of the hole. 5 LC PC board fixed tape 2 LC-1042 flexible board. 2-14...
  • Page 20 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-15. LC-1042 FLEXIBLE BOARD Note: Do not touch the red frame part. – Rear view – 5 LC-1042 flexible board 2 hook 4 sheet EM shield LC FPC 1 Peel off the sensor part of the 3 Peel off the LC-1042 LC-1042 flexible board.
  • Page 21 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-17. CABINET (UPPER) BLOCK 5 two screws (M1.7 6 Lift up the cabinet (upper) block. top side 4 screw (M1.7 1 shoe cap 3 screw (M1.7 2 Open the battery lid. – Bottom view – rear side 9 cabinet (upper) block 8 flash unit flexible board 7 Turn the SY WP sheet (upper).
  • Page 22 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-18. SY HEAT SINK BLOCK 4 Peel off the RL-1060 flexible board. top side 5 screw (M1.7 1 screw (M1.7 2.5) 3 tape AS 1/2 6 two screws (M1.7 2.5) 7 static plate 2 finder cover assy 9 MIC jack holder 8 screw (M1.7...
  • Page 23 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-19. VF BLOCK top side 1 Remove the VF panel flexible board from the hook. ST-1035 flexible board 5 VF block 2 screw (M1.7 2.5) rear side 4 VF panel flexible board 3 Remove the VF block. 2-2-20. SHOE BLOCK ASSY...
  • Page 24 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-21. SY-1094 BOARD BLOCK 2 hook 3 Remove the loud speaker (0.8 cm). 4 ST-1035 flexible board 5 RL-1046 flexible board 1 coaxial cable (85 mm) 6 BT-2011 flexible board 7 FP-2045 qa MDV-2000 flexible board flexible board...
  • Page 25 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-22. SY BASE BLOCK 1 Peel off the tip of the ST insulating sheet from the device unit. top side 3 glass assy flexible board. 8 SY base block aluminium elect cap 7 Draw the contact unit flexible board out of the inside of the aluminium elect cap.
  • Page 26 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-23. MC BASE BLOCK 1 ST cap cushion (WP) 2 ST insulating sheet Note: Take care not to damage the chip parts. 6 two claws Note: Take care not to damage the chip parts. top side 3 protection SP cushion 4 Peel off the ST-1035 flexible board.
  • Page 27 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-24. ST-1035 FLEXIBLE BOARD BLOCK top side 5 MC base assy 1 claw 2 Remove the ST-1035 flexible board from the rib of the MC base assy. ST-1035 flexible board 4 Remove the aluminium elect cap from the MC base assy.
  • Page 28 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-26. RL BASE BLOCK 4 claw 5 RL base block 4 claw top side 2 hook 1 two bosses BT frame block 3 Peel off the NFC antenna. front side 2-2-27. RL-1060 FLEXIBLE BOARD qs Remove the RL-1060 flexible board from the RL base assy in order to arrow A to B.
  • Page 29 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-28. DEVICE UNIT top side rear side 1 two screws (M1.7 2 device unit 2-2-29. GRIP ASSY 1 tapping screw (1.7 cabinet (front) block top side 2 grip assy front side 2-24 SYS SET...
  • Page 30 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-30. ISP-2004 FLEXIBLE BOARD, ISL-2005 FLEXIBLE BOARD top side rear side 2 ISL-2005 flexible board 1 ISP-2004 flexible board 2-2-31. LENS LOCK BUTTON, DP SHEET N FRAME 4 DP sheet N frame pasting reference front side 2 two claws...
  • Page 31 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-32. IM IMAGER UNIT 4 adjust IM washer (A) 5 adjust IM washer (B) Note: Take note of the amount of washers. Note: Take note of the amount of washers. top side 6 adjust IM washer (C) Note: Take note of the amount of washers.
  • Page 32 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-34. SHUTTER BLOCK top side 2 shutter block rear side 1 two tapping screws (1.7 3.5) 2-27 SYS SET...
  • Page 33 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-35. MB CHARGE UNIT, SHUTTER UNIT (AFE-3032) – Rear view – Hold here. Do not touch this part. top side 4 MB charge unit 2 claw 3 shutter unit (AFE-3032) 1 tapping screw (MB charge unit fixed) (1.6 4.5)
  • Page 34 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-36. MB N PLATE A, MB N PLATE SP 1 four screws (0+Z M1.7 5.5) (SG SPIN) 2 MB N plate A 3 MB N plate SP front side bottom side 2-2-37. MB L LOCK PIN ASSY 2 MB ring sheet...
  • Page 35 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-2-38. MB N CONTACT UNIT Note 1: Hold the MB N contact unit at the center of both sides. Hold here. 2 two tapping screws (1.7 3.5) 4 MB N contact unit Do not touch this part. 3 Draw the flexible board out of the hole.
  • Page 36 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3. ASSEMBLY • Assemble in the order shown in the fl owchart below. 2-3-1. ASSEMBLY FLOW MB N FRAME 2-3-2. MB N CONTACT UNIT (Page 2-32) 2-3-3. MB L LOCK PIN ASSY (Page 2-32) 2-3-4. MB N PLATE SP...
  • Page 37 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M Assemble in the order indicated by the numbers assigned to the parts in the fi gures such as 1. Note: 2-3-2. MB N CONTACT UNIT Note 1: Hold the MB N contact unit at the center of both sides.
  • Page 38 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-4. MB N PLATE SP – Rear view – MB N plate SP front side 2 MB N plate SP 3 boss 3 boss 1 Apply grease G-85 bottom side • Installing position of the MB N plate SP...
  • Page 39 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-5. MB N PLATE A marking position 1 MB N plate A hole 2 Insert the MB L lock pin to the hole. front side bottom side 4 screw (0+Z M1.7 5.5) (SG SPIN) 5 screw (0+Z M1.7 5.5) (SG SPIN)
  • Page 40 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-6. MB CHARGE UNIT – Rear view – Hold here. Do not touch this part. top side 2 MB charge unit 3 claw 1 shutter unit (AFE-3032) 4 tapping screw (MB charge unit fixed) (1.6 4.5) (0.12 ± 0.02 N•m) 3 claw Hold here.
  • Page 41 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-7. SHUTTER BLOCK top side 2 boss 1 shutter block Note: Take care so that the flexible board is not pinched. rear side 3 two tapping screws (1.7 3.5) (0.22 ± 0.02 N•m) 2-3-8. GLASS ASSY 9 four screws (M1.7 3.5)
  • Page 42 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-9. IM IMAGER UNIT 1 adjust IM washer (A) Note 1: Install exactly as recorded during disassembly. Note 2: Be careful of the direction of installation. 3 adjust IM washer (B) 2 two bosses Note 1: Install exactly as recorded during disassembly.
  • Page 43 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-10. LENS LOCK BUTTON, DP SHEET N FRAME 1 DP sheet N frame : guide line center Note: Do not touch both ends. pasting reference front side ditch DP sheet N frame 3 two claws bottom side 4 boss 2 lens lock button 2-3-11.
  • Page 44 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-12. GRIP ASSY • Arrenge the coaxial cable. coaxial cable 2 tapping screw (1.7 coaxial cable (0.12 ± 0.02 N•m) coaxial cable cabinet (front) block top side – Rear view – – Front view – 1 grip assy front side 2-3-13.
  • Page 45 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-14. RL-1060 FLEXIBLE BOARD 1 RL-1060 flexible board 9 Make a valley fold. (three places) 4 Make a valley fold. 5 Make a valley fold. 3 two solders 6 Make a valley fold. 2 NFC antenna 7 Make a valley fold.
  • Page 46 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-15. RL BASE BLOCK 2 claw 1 RL base block 2 claw top side BT frame block front side • Installation direction for the flexible board Convex portion terminal side 3 hook 4 two bosses FP-2045 flexible board...
  • Page 47 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-16. BT BLOCK 1 AF window 2 AF window retainer 6 Connect the shutter unit flexible board. 4 Make a valley fold the shutter unit flexible board. 3 boss top side 7 Install the BT block. Note: Take care so that the contact unit flexible board is not pinched.
  • Page 48 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-17. ST-1035 FLEXIBLE BOARD BLOCK 4 microphone block 4 microphone block 1 ST-1035 flexible board 5 solder [black] 5 solder [orange] polarity [–] 3 two solders 5 solder 5 solder [black] [orange] 2 aluminium elect cap qa Make a valley fold.
  • Page 49 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-18. MC BASE BLOCK top side 1 MC base block 2 Paste the ST-1035 flexible board with adhesive sheet. Note 1: Take care not to damage 4 boss the chip parts. 3 SY frame block Note 2: Take care so that the flexible board is not pinched.
  • Page 50 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-19. SY BASE BLOCK 9 Paste the tip of the ST insulating sheet on the device unit. top side 7 Connect the glass assy flexible board. 1 SY base block 4 two bosses 2 Pass the contact unit flexible...
  • Page 51 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-20. SY-1094 BOARD-1 • Continued on 2-3-21 (page 2-47). 1 SY-1094 board (side B) 3 solder 2 loud speaker (0.8 cm) [black] + 1.0, - 0.5 mm ± 0.5 mm 3 solder [red] : guide line 4 insulating sheet BN + 1.0, - 0.5 mm...
  • Page 52 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-21. SY-1094 BOARD-2 qs Arrange the coaxial cable (85 mm). coaxial cable (85 mm) 0 Hook the loud speaker harness. [black] – Top view – coaxial cable (85 mm) [red] : guide line 9 Install the loud speaker (0.8 cm).
  • Page 53 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-22. SHOE BLOCK ASSY 0 to 0.5 mm 5 tape AS 1/2 0 to 0.5 mm : guide line : guide line 6 Install the shoe block assy. qa Install the microphone block. 4 Connect the MIS-2003 Note: Take care so that the flexible flexible board board is not pinched.
  • Page 54 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-23. VF BLOCK top side 5 Hook the VF panel flexible board. ST-1035 flexible board : guide line 2 Install the VF block. Note: Take care so that the ST-1035 flexible board is not pinched. 4 screw (M1.7 2.5)
  • Page 55 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-24. SY HEAT SINK BLOCK top side 2 Insert the SY WP sheet (upper) under the shoe plate. RL-1060 flexible board 3 boss 1 SY heat sink block shoe plate 3 boss rear side 4 Install the SY heat sink block.
  • Page 56 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-25. CABINET (UPPER) BLOCK top side 3 Set the “OFF” 1 cabinet (upper) block 4 Set the “P” 2 Pop-up the flash unit. 6 Connect the flash unit flexible board. 5 Set the orientation of D-cut of the switch as shown in rear side the figure.
  • Page 57 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-26. LC MAGNET1/2 HOLDER 4 retainer cushion (HG) 6 two screws (M1.4 6 two screws (M1.4 Note: Install the magnet with the marking oriented as shown. 4 retainer cushion (HG) 5 Align the two bosses with the two holes...
  • Page 58 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-27. LC-1042 FLEXIBLE BOARD 2 sheet EM shield LC FPC : guide line 1 LC-1042 flexible board + 1.0 mm + 0.5 mm 3 Crease the LC-1042 flexible board. : Mountain fold : Valley fold – Rear view –...
  • Page 59 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-28. LC-1045 BOARD 3 Align the two holes to paste the LC-1045 board to the LC hinge assy. hole hole – Rear view – Note: Do not touch the red frame part. 2 Peel off the release paper.
  • Page 60 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-29. LC FPC PROTECTION SHEET 1 Align the two holes to paste the LC FPC protection sheet to the LC hinge assy. hole (circle) hole (square) hole (circle) hole (square) LC hinge assy 2 Press the LC PC board fixed tape with the tweezers in the order of the arrows A to D.
  • Page 61 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-30. LCD BLOCK ASSY 2 LC hinge block front side 3 Put the flexible board through the hole. 4 two claws bottom side 1 LCD block assy 6 Connect two LCD flexible board. 5 claw 7 Connect the BL flexible board.
  • Page 62 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-31. LC INNER 3 retainer cushion (LC) rear side : guide line 1 LC inner 2 magnet marking bottom side marking Note: Install the magnet with the marking oriented as shown. 6 claw 5 claw front side 6 claw 4 Put the LC-1042 flexible board through the hole.
  • Page 63 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-32. LC CABNET REAR BLOCK front side 2 Align with the two claws to install the LC cabnet rear block. claw 1 LC cabnet rear block claw bottom side 3 two claws 6 two screws (M1.4 1.4) 4 claw 7 two screws (M1.4...
  • Page 64 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-33. HINGE FPC COVER2 PLATE 1 Align the two holes with the two bosses to paste the FPC hinge fixed tape. 5 hinge FPC cover2 plate front side 2 Peel off the release paper. bottom side 6 Align the three claws with the three grooves to install the hinge FPC cover2 plate.
  • Page 65 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-34. HINGE FPC COVER1 PLATE front side 6 Align the two claws with the two grooves 1 Align the two holes with the two bosses to install the hinge FPC cover1 plate. to paste the FPC hinge fixed tape.
  • Page 66 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-35. RS-1013 FLEXIBLE BOARD 1 RS-1013 flexible board 2 Crease the RS-1013 flexible board. : Mountain fold 90° : Valley fold ± 1.0 mm 90° 180° ± 1.0 mm 90° 90° 180° 0 Paste the RS-1013 flexible board with adhesive sheet.
  • Page 67 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-36. CONTROL SWITCH BLOCK 5 Connect the flexible board. 2 Install control switch block to two claws. 4 Fit the rib. 3 Fit the two claws. – Rear view – top side 1 control switch block rear side 2-62 SYS SET...
  • Page 68 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-37. REAR BUTTON FRAME BLOCK 2 Paste the sheet (upper) to two boss positions. 4 Set the “AF/MF” 1 cabinet rear block top side 8 claw 5 rear button frame block 3 Paste the sheet (lower) to two boss positions.
  • Page 69 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-38. REC BUTTON PLATE 5 Install the rib 4 Slide the REC button plate in the direction of the arrow. to the ditch. 2 Install the rib to the ditch. 3 Install the REC button plate 6 Fit the rib.
  • Page 70 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-39. REAR FRAME BLOCK 1 magnet 2 retainer cushion (RE) 3 yoke magnet holder marking top side Note: Install the magnet with the marking oriented as shown. 7 two screws (M1.7 2.5) (0.12 ± 0.02 N•m) 6 claw boss 8 two tapping screws (1.7...
  • Page 71 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-40. LC PANEL BLOCK 4 Align the two holes with the two bosses to paste the LC rear fixed tape. 6 hook 6 hook 7 boss 7 boss 5 Peel off the release paper. 8 Paste the LC-1042 flexible –...
  • Page 72 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-3-41. CABINET (REAR) BLOCK 2 cabinet (rear) block 3 Connect the LC-1042 rear side flexible board. 4 Connect the RS-1013 flexible board 5 Install the cabinet (rear) block bottom side in the direction of the arrow. 6 Open the LCD panel.
  • Page 73 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-4. TORQUE VALUE OF OTHER SCREWS Tighten screws while referring to the torque values below for screws not indicated in “2-3. ASSEMBLY”. MD dial assy rear frame cabinet (upper) block tripod screw two tapping screws (1.7 two screws (M1.7 2.5)
  • Page 74 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-5. PASTING POSITION OF OTHER PARTS Work while referring to the information below for pasting position not indicated in “2-3. ASSEMBLY”. : guide line • FPC-2010 flexible board • BT frame assy 0 to 0.5 mm – Rear view –...
  • Page 75 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M : guide line • SY base block • VF block 0 to 1.0 mm trans insulating sheet 0 to 0.5 mm 0 to 1.0 mm 0 to 0.5 mm heat sheet (EV) EYE sensor cushion 0 to 1.0 mm –...
  • Page 76 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M : guide line • ST arm assy • ST cover – Bottom view – Note: Install the magnet with the marking oriented as shown below. magnet marking bottom side Fold. ± 0.5 mm ST FPC fix tape ± 0.5 mm...
  • Page 77 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M : guide line • rear button frame • LC cabnet rear assy 0 to 1.0 mm 0 to 1.0 mm tape AS 1/2 LC insulating sheet – Front view – – Front view – • rear frame • flash unit...
  • Page 78 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 2-6. FLEXIBLE BOARD SETTING : Mountain fold : Valley fold 2-73E SYS SET...
  • Page 79 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3. EXPLODED VIEWS Note: The components identified by mark 0 or dotted line with • -XX and -X mean standardized parts, so they may have some dif- mark are critical for safety. ference from the original one. Replace only with part number specified.
  • Page 80 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-2. CABINET (REAR) SECTION Refer to LC panel block section. rear side (Note) (Size 9 14 mm) front side Note: When replacing Ref. No. 61, cut the new part to the specifi c size indicated in the fi gure before use.
  • Page 81 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-3. LC PANEL BLOCK SECTION rear side LCD901 front side Ref. No. Part No. Description Ref. No. Part No. Description X25977011 LC HINGE ASSY (626) 474666501 LC FPC PROTECTION SHEET (626) 474666001 CUSHION (HG (62600)), RETAINER 474503501 HOLDER (62600), LC MAGNET2 147154931 MAGNET (ND7.9X2.9X1.2)
  • Page 82 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-4. CABINET (UPPER) SECTION Refer to VF panel section. front side rear side supplied Ref. No. Part No. Description Ref. No. Part No. Description 457483501 COVER (79160), ST (BLACK) X25918111 BRACKET (G) ASSY (79160), STRAP 457483511 COVER (79160), ST (SILVER) 430011301 TAPPING (1.7) (CH) (L = 3.5 mm) (SILVER)
  • Page 83 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-5. VF PANEL SECTION not supplied not supplied LCD902 front side (Note) (Size 9 14 mm) Refer to main board section. rear side Note: When replacing Ref. No. 215, cut the new part to the specifi c size indicated in the fi...
  • Page 84 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-6. MAIN BOARD SECTION (Note) (Size 9 14 mm) not supplied front side Refer to SY frame section. SP901 rear side Note: When replacing Ref. No. 256, cut the new part to the specifi c size indicated in the fi gure before use.
  • Page 85 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-7. SY FRAME SECTION ANT901 BT101 (Note 2) front side BT901 BH101 (Note 2) MIC902 CN-1039 board MIC901 Refer to cabinet (front) section. (Note 1) (Size 9 14 mm) C901 : BT101 (LITHIUM SECONDARY BATTERY) Board on the mount position.
  • Page 86 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-8. CABINET (FRONT) SECTION (including IC6001 (CMOS imager) and IS-1027 complete board)) (Note 1) front side Refer to mount section. (Note 2) Refer to imager unit section. (Note 2) not supplied Note 1: The imager may get structurally damaged from the infl...
  • Page 87 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-9. IMAGER UNIT SECTION not supplied (All mounted parts and IS-1027 complete board are not supplied, rear side but they are included in Device Unit (2100) Service) not supplied (Note) front side Note: Refer to “5. CLEANING” on page 5-1 for method of cleaning the OLPF.
  • Page 88 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-10. MOUNT SECTION not supplied rear side (Note) front side Note: The device unit (2100) service includes a protective body cap. Ref. No. Part No. Description Ref. No. Part No. Description 418853601 CAP, BODY (Note) X25906361 MB L LOCK PIN ASSY (5000) 418654511 SCREW, 0+Z M1.7 SG (SPIN) (L = 5.5 mm)
  • Page 89 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 3-11. SELECTION PARTS Ref. No. 368 ADJUST IM WASHER (A) Ref. No. 370 ADJUST IM WASHER (C) Select the optimum thickness of washer. Select the optimum thickness of washer. Thickness (mm) Part No. Thickness (mm) Part No. 0.05 *4-185-995-01 0.05...
  • Page 90 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 4. SUPPLIED ACCESSORIES Note: • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or dotted line with mark are critical for safety.
  • Page 91 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 5. CLEANING Preparation for Remedy Cleaning Procedure for the OLPF If you use the CCD cleaning Jig (New) (J-6082-663-A) below, make 1. Clean up the tip of CCD cleaning jig. sure to clean the Tip of the CCD cleaning jig below before using.
  • Page 92 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M 6. ADJUSTMENT For adjusting this models, the Adjust manual and the Adjust station are required. Adjust station It is the software to start up Adjust manual for each model. The installer of the Adjust station and the installation manual are attached, be sure to confirm the contents of them.
  • Page 93 2019/01/30 02:39:50 (GMT+09:00) ILCE-6400/6400L/6400M Revision History Ver. Date History Contents 2019.01 Official Release — SYS SET...
  • Page 94 Conditions of Use: Please use this information only for the purpose of performing repair, maintenance and/or confi guration services of the Sony products (hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service agreement”). Using this information for any purpose other than the purpose described foregoing is forbidden.
  • Page 95 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
  • Page 96 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y ELECTRICAL PARTS LIST (ENGLISH) (JAPANESE) NOTE: 【使用上の注意】   • -XX, -X mean standardized parts, so they may have some dif- •  ここに記載されている部品は,  補修用部品であるため,  回路図 ferences from the original one. 及びセットに付いている部品と異なる場合があります。 • Items marked “*” are not stocked since they are seldom required • ...
  • Page 97 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y AN-1028 BT-2011 CN-1039 FP-2045 FPC-2010 IS-1027 ISL-2005 ISP-2004 JK-1024 LC-1042 LC-1045 Ref. No. Part No. Description Ref. No. Part No. Description A2225900A AN-1028 BOARD, COMPLETE < COMPOSITION CIRCUIT BLOCK > *********************** RB201 123437221 RES, NETWORK 100 (1005X4) < CAPACITOR >...
  • Page 98 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LC-1045 MDV-2000 MIS-2003 RL-1060 RS-1013 ST-1035 Ref. No. Part No. Description Ref. No. Part No. Description C0011 112219011 CERAMIC CHIP 6.3V < PHOTO REFLECTOR > C0012 112097911 CERAMIC CHIP 2.2uF 6.3V C0013 112219011 CERAMIC CHIP 6.3V PH0001 (Not supplied)
  • Page 99 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y ST-1035 SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description C3804 111840311 CERAMIC CHIP 0.001uF C0106 (Not supplied) CERAMIC CHIP C3805 (Not supplied) CERAMIC CHIP 22uF C0116 111674911 CERAMIC CHIP 22uF 6.3V * C5800 111673811 CERAMIC CHIP 6.3V...
  • Page 100 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description C2702 (Not supplied) CERAMIC CHIP 0.1uF 6.3V C5109 (Not supplied) CERAMIC CHIP 2.2uF 6.3V C3003 112021811 CERAMIC CHIP 0.001uF C5110 (Not supplied) CERAMIC CHIP 2.2uF C3008 112021811 CERAMIC CHIP 0.001uF...
  • Page 101 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description C5715 111803411 CERAMIC CHIP 0.1uF C6214 (Not supplied) CERAMIC CHIP 0.1uF 6.3V C6001 (Not supplied) CERAMIC CHIP 0.1uF 6.3V C6215 (Not supplied) CERAMIC CHIP 0.1uF 6.3V C6004...
  • Page 102 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description C6705 (Not supplied) CERAMIC CHIP 2.2uF D0810 (Not supplied) DIODE BAS16L C6706 (Not supplied) CERAMIC CHIP 0.1uF 6.3V D0811 (Not supplied) DIODE BAS16L C6760 (Not supplied) CERAMIC CHIP 0.1uF...
  • Page 103 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description FB3024 146958121 INDUCTOR, FERRITE BEAD (1005) L0400 146984521 INDUCTOR 4.7uH * FB3025 146958021 INDUCTOR, FERRITE BEAD (1005) L0600 (Not supplied) CHOKE COIL 2.2uH (2520) L0812 (Not supplied) CHOKE COIL 2.2uH...
  • Page 104 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description Q5541 655163101 TRANSISTOR RN1104MFV (TL3S R1131 125725311 METAL CHIP 4.7K 1/20W * Q5542 655162501 TRANSISTOR RN2104MFV (TL3S R1133 125728511 METAL CHIP 100K 1/20W * Q5700 655359101 TRANSISTOR...
  • Page 105 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description R3021 124068391 METAL CHIP 1/20W R5058 125728511 METAL CHIP 100K 1/20W R3022 124068391 METAL CHIP 1/20W R5100 125725111 METAL CHIP 3.9K 1/20W R3023 124068391 METAL CHIP 1/20W...
  • Page 106 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 Ref. No. Part No. Description Ref. No. Part No. Description R6703 124071191 METAL CHIP 1/20W < VIBRATOR > R6704 124072991 METAL CHIP 1/20W * R6706 124070791 METAL CHIP 1/20W X0700 181470211 QUARTZ CRYSTAL UNITS (32.768kHz) * R6707...
  • Page 107 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2. BLOCK DIAGRAMS 2-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. IS-1027 BOARD ISL-2005 SY-1094 BOARD (1/2) LC-1042 FLEXIBLE LC-1045 BOARD...
  • Page 108 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-1094 BOARD (2/2) AN-1028 BOARD FPC-2010 FLEXIBLE BOARD WLAN_SDIO_D0 - D3 MMC0_DAT_0-7 WLAN_SDIO_CLK...
  • Page 109 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2-3. POWER BLOCK DIAGRAM (1/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-1094 BOARD (1/4) UNREG_ACC, UNREG_CM, F0006 UNREG_ACC UNREG_DD_ASV, UNREG_DD F0005 Q0600 UNREG_CM UNREG_DD, UNREG_DD_ASV...
  • Page 110 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2-4. POWER BLOCK DIAGRAM (2/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-1094 BOARD (2/4) IC0813 A_5.0V/5.5V_IMG 1.8V REG AS_5.5V (8/27) POWER (3/4) (PAGE 2-5) A_3.15V_IC_6000_LDO...
  • Page 111 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2-5. POWER BLOCK DIAGRAM (3/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-1094 BOARD (3/4) AS_5.5V, IC6700 IC6702 IC6703 CAM_5.5V A_5.0V/5.5V_IMG LEVEL SHIFT LEVEL SHIFT...
  • Page 112 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 2-6. POWER BLOCK DIAGRAM (4/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-1094 BOARD (4/4) IC5321 DC/DC CONVERTER (4/27) Q5321 OVERVOLTAGE VO 10 CN3001 PROTECTOR...
  • Page 113 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 3. FRAME SCHEMATIC DIAGRAMS C901 FLASH UNIT MIC901 MIC902 (CHARGING CAPACITOR) (MICROPHONE) (L) (MICROPHONE) (R) S0004 (MODE DIAL) LC-1042 FLEXIBLE BOARD S0001 CN801 S0002 (SHUTTER) ST-1035 FLEXIBLE LCD901 LC-1045 BOARD (LCD MODULE) BOARD S0003 ON/OFF TOUCH ANT901 CN0003...
  • Page 114 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 4. SCHEMATIC DIAGRAMS (ENGLISH) (JAPANESE) THIS NOTE IS COMMON FOR SCHEMATIC DIA- 回路図共通ノート GRAMS (他に必要なノートは各セクションに記載していま (In addition to this, the necessary note is printed す) in each block) For Schematic Diagrams 回路図ノート • All capacitors are in μF unless otherwise noted. pF : μ...
  • Page 115 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CN6001 REG_GND VDDSUB IS_VDD_HCM IS_VDD_HCM IS_VDD_SUB/HAN/HDA VRLS15 IS_VDD_SUB/HAN/HDA R6033 VDDLSC/LSA VRLT12 VDDLSC/LSA R6032 VDDLSC/LSA IC6013 R6034 VDDLSC/LSA C6128 C6130 VDDMIO/MPX VOUT VEE_3 VOUT VEE_3 VDDMIO/MPX IC6014 COM601 C6132 C6131 REG_GND C6127 MM1898A15RRE -1.5V REG REG_GND VDDHPX/HVS CONT CONT...
  • Page 116 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y VREF_ON XCLR XCLR DP00 DP00 REG_GND REG_GND DM00 DM00 DP01 DP01 REG_GND REG_GND REG_GND REG_GND DM01 DM01 DP02 DP02 REG_GND REG_GND DM02 DM02 REG_GND REG_GND DP03 DP03 SY-1094 IS-1027 REG_GND REG_GND DM03 DM03 (5/27) CN6002 REG_GND REG_GND CN0401...
  • Page 117 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CN001 LN001 CM0001 BATT_UNREG UNREG_IC_5651_IN ANTI_DUST+ ANTI_DUST+ ANTI_DUST+ ANTI_DUST+ IM IR ANTI_DUST+ ANTI_DUST+ F0001 GLASS 3A/32V CL0003 CL0004 ANTI_DUST- ANTI_DUST- ASSY UNREG_IC_5651_OUT UNREG_DD ANTI_DUST- ANTI_DUST- F0002 ANTI_DUST- ANTI_DUST- 3A/32V CL0008 CM_TEMP UNREG_DD_ASV TEMP_GND F0003 SY-1094 3A/32V CL0006 (27/27)
  • Page 118 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y L5150 2.2uH R5162 IC5150 CAM_5.5V TPS63060DSCR DC/DC CONVERTER CM5165 UNREG_SUB_ R5163 UNREG_A XCON_VOUTA VOUT AUDIO_5.5V CL5150 DD_ON2 DD_ON2 CM5166 PS_1 R5151 PS/SYNC R5164 CM5164 POKA VAUX AS_5.5V XDD_PFM_ON2 CL0109 C5150 C5151 C5152 CM5167 R5184 C5154 C5156 R5152 0.1u 4.7k...
  • Page 119 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D_3.15V_MEDIA_2 CL0203 MS_PWR_ON CAM_5.5V CAM_5.5V DD_ON3 IC5200 BD8331GU-E2 DC/DC CONVERTER CL0202 LDO1_ON XCS_IC_5200 LDO1_ON PVDD_LDO1 CAM_SCK_1 PVDD_LDO1 LN0209 LDO1_OUT CAM_SO_1 LDO1_OUT LN0210 LDO1_FB DD_ON R5202 C5204 C5207 R5201 DD_ON CM0200 ACV_UNREG LN0200 ACV_UNREG BATT_UNREG LN0201 BATT_UNREG C5201 4.7u...
  • Page 120 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D_3.15V Q5321 CM0303 RW1A020ZPT2R OVERVOLTAGE PROTECTOR REG_UNREG REG_UNREG UNREG_DD R0304 R5338 EVF_VDD EVF_VDD UNREG_SUB_ R0303 R5335 C5331 L5320 10uH 0.01u R5336 180k C5326 0.1u C5328 C5325 4.7u R5337 0.1u C5327 IC5321 0.1u C5329 C5330 TPS61093DSKR 2.2u R5334 DC/DC CONVERTER...
  • Page 121 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CN0400 CN0401 L0400 REG_GND REG_GND 4.7uH A_5.0V/5.5V_IMG IS_VDD_HCM/HVS CIS0_VD IS_VDD_HCM/HVS CIS0_HD C0412 C0413 IS_VDD_SUB/HAN/HDA REG_GND CM0403 IS_VDD_SUB/HAN/HDA REG_GND CL0400 D_1.2V_IMG D_1.2V_IMG VDDLSC/LSA CIS0_SHT_RST C0415 R0429 VDDLSC/LSA CIS0_XCS VDDLSC/LSA CIS0_SO C0407 CM0401 VDDLSC/LSA CIS0_SCK VDDMIO/MPX CIS0_SI R0427 R0424 REG_GND...
  • Page 122 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y EVER_3.15V R5660 2.2k R5655 R5656 D0600 2.2k 2.2k CL-271TLY-C-TS USB_CHG_SDA Q0601 USB_CHG_SCL RN1102MFV(TL3S CHG_LED_ON LED DRIVE VBUS_5V CL0061 IC_6000_SUS CL0060 IC_5651_EN C5654 PGND C5650 R5654 2.2k AGND UNREG_IC_5651_IN BATT BATTG C5659 ACVG 0.001u IC5651 C5656 LN0611 OZ8072PN-C5-0-TR PVBUS...
  • Page 123 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D0705 RB520CS30L CL0751 LN0731 VCC5 VBUS_5V Q5702 EVER RN2131MFV EVER_3.15V USB ACTIVE SWITCH R5714 R5702 C5708 1.5k 2.2u UDP/UAN0 R5712 USB_D+_DWN UDM/UAN1 R5713 USB_D–_DWN R5717 R5715 P35/LSO P23/SCK0(SCL0) LN0714 P35/LSO P23/SCK0(SCL0) PULL_UP_SYS_SET P0F/NMIX/WKUP0 P22/SOT0(SDA0) DWN_UART_TXD BATT_IN_IC_5700 P0F/NMIX/WKUP0 P22/SOT0(SDA0)
  • Page 124 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CM0845 ASV_DD_SW1 R0899 L0812 2.2uH ASV_DD_SW2 CM0815 CM5052 ASV_DD_VOUT D_0.9V_ASV C5055 R0842 0.1u C5058 UNREG_DD_ASV C5059 R5056 CM5055 D0801 C5060 ASV_DD_VIN RB520CS30L VIN_16 AGND R5099 R5057 4.7k VIN_17 D0802 ASV_DD_VCC RB520CS30L D0810 IC5050 BAS16L RT6203BLGQW AS_5.5V ASV_DD_EN DD_ON1...
  • Page 125 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IC6000 (2/8) AMZ16NN02A CPU, CAMERA DSP, AV SIGNAL PROCESS, LENS CONTROL, MODE CONTROL, HDMI PROCESS IC6000 (1/8) AMZ16NN02A GCS2DPHY_RX_AVDP_AVD A_0.9V_NOTASV_GCS2 GCS2_RX_AVDP_T3 GCS2_RXDP7 CPU, CAMERA DSP, AV SIGNAL PROCESS, LENS CONTROL, MODE CONTROL, HDMI PROCESS FB6021 GCS2_RX_AVDP_T4 GCS2_RXDN7 C6033...
  • Page 126 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IC6000 (3/8) AMZ16NN02A IC6000 (4/8) CPU, CAMERA DSP, AV SIGNAL PROCESS, AMZ16NN02A LENS CONTROL, MODE CONTROL, HDMI PROCESS CPU, CAMERA DSP, AV SIGNAL PROCESS, VDAC_AVDH VDAC_AVOUT R6121 LENS CONTROL, MODE CONTROL, HDMI PROCESS VDAC_AVDH VDAC_AVOUT VDE1833_BEEP AE16 AE17 BEEP_PWM D_3.15V_IC_6300_IC_6000...
  • Page 127 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y R1245 IC6000 (6/8) A_1.2V_IC_6300_IC_6000 AMZ16NN02A CM1117 CPU, CAMERA DSP, AV SIGNAL PROCESS, R1242 A_1.8V_IC_6300_IC_6000 LENS CONTROL, MODE CONTROL, HDMI PROCESS 100k R1246 ADC_AVDH ADC0_IN11 R1243 100k A_1.8V_IC_6300_IC_6000 ADC0_AVDH ADC0_IN11 SHOE_ID3 ADC0_IN10 IC6000 (5/8) ADC0_IN10 SHOE_ID2 R1244 100k C6161...
  • Page 128 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IC6000 (8/8) AMZ16NN02A CPU, CAMERA DSP, AV SIGNAL PROCESS, LENS CONTROL, MODE CONTROL, HDMI PROCESS IC6000 (7/8) CORE_VDD_NOTASV AMZ16NN02A D_0.9V_NOTASV_LDO VDD_AD7 CPU, CAMERA DSP, AV SIGNAL PROCESS, VDD_AD8 LENS CONTROL, MODE CONTROL, HDMI PROCESS R6183 C6250 C6259 CORE 4.7u...
  • Page 129 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y NC_M7 NC_H1 NC_M8 NC_G14 NC_M9 NC_G13 NC_M10 NC_G12 NC_M11 RFU_G10 NC_M12 VSS_G5 NC_M13 NC_G3 NC_M14 NC_G2 NC_N1 NC_G1 VSSQ_N2 NC_F14 C6281 0.1u NC_N3 NC_F13 VCCQ_N4 NC_F12 RFU_F10 VSSQ_N5 NC_N6 VCC_F5 C6287 0.1u NC_N7 NC_F3 NC_N8 NC_F2 NC_N9 NC_F1...
  • Page 130 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IC6300 (1/5) IC6300 (2/5) IC6300 (3/5) LTNNNN10A LTNNNN10A LTNNNN10A CAMERA SIGNAL PROCESS CAMERA SIGNAL PROCESS CAMERA SIGNAL PROCESS CL1409 VDD_NOTASV VDDE_H FSP_ADDR_20 VDDE_E CIS0_HD D_1.0V_IC_6300 VDD_P18 VSS_J7 D_1.8V_IC_6300_IC_6000 VDDE_H_G22 HB_ADDR20 REG_GND D_1.8V_IC_6300_IC_6000 VDDE_E_AB5 CIS0_HD CIS0_HD FSP_ADDR_19 CIS0_VD CL1410...
  • Page 131 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IC6300 (4/5) IC6300 (5/5) LTNNNN10A LTNNNN10A R6360 L6361 CAMERA SIGNAL PROCESS CAMERA SIGNAL PROCESS MIPIMPHY_ROCK 4.7uH AE13 LN1431 VDDE_DDR_POPVDD12 IC_6300 DDR IO A_3.15V_IC_6000 VDP_AD7 MIPIMPHY_EXT12K REG_GND VDDE_DDR_J24 VREFCA X6360 C6363 C6366 C6369 72MHz VDP_AE7 MIPIMPHY_VREF CM6360 VDDE_DDR_J25 0.1u...
  • Page 132 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y REG_GND PGND PGND C1700 PGND 0.001u PGND LENS_4.8V LENS_4.8V LENS_4.8V C1701 LENS_4.8V MB N LENS_4.8V CONTACT UNIT REG_GND REG_GND VDD_EVER EVER_3.15V BODY_VD_LENS BODY_VD_LENS C6700 R6711 LENS_3.1V LENS_3.1V 4.7u IC6703 D_3.15V CE/CE LENS_CS_BODY LENS_CS_BODY R5540K004D-TR LENS_DATA_BODY B+ SWITCH VOUT...
  • Page 133 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y R1800 VDD_U UNREG_CM CM1800 VDD_E EVER_3.15V IC6760 TC7SH86FU R6760 CHARGE MOTOR CONTROL Q6761 C6761 CL1800 IN_B US6M2GTR SC_M_1 IN_B DISCHARGE, CL1801 IN_A C6760 CHARGE MOTOR DRIVE SC_M_2 IN_A 0.1u OUT_Y R6761 CM_OUT Q6760 RN1102MFV(TL3S CHARGE MOTOR DRIVE R6763...
  • Page 134 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y J7381 AN-1028 CM2301 CM2302 J7391 Through the COAXIAL CABLE R2318 R2305 WLAN_ANT R2317 R2319 REG_GND WLBT_ANT_MOD R2307 WLBT_VBAT D_3.3V_WLAN CM2300 WLBT_VIO D_3.15V WLBT_VIO_SEL C2303 C2304 C2309 CL2302 WLBT_VDDXO D_1.8V_WLAN C7330 4.7u CM2303 R2315 WL_SDIO_CLK WL_SDIO_CLK CM7334 WLAN_SDIO_CLK WL_SDIO_CMD...
  • Page 135 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CM2400 R2406 D_3.15V C7401 0.1u NFC_SCK C7404 C7403 C7402 SPICLK NFC_L1 NFC_L1 TEST0 NFC_L2 NFC_SIO IC7401 NFC_L2 DATA CXD9950AK CL7401 NFC_SEL NFC INTERFACE CL7400 XNFC_RFDET NFC_IRQ RFDET NFC_SW XNFC_RFDET CL2401 NFC_SCK NFC_SCK NFC_SCK CL2402 NFC_SIO NFC_SIO NFC_SIO CL2403...
  • Page 136 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y VCC_LIGHT CAM_5.5V R7891 Q7890 HN1A01FU Q7890, Q7891 R7892 LED DRIVE R7890 AF_LED_A AF_LED_A_EMT AF_LED_CONT AF_LED_CNT Q7891 RN1102MFV(TL3S REG_GND REG_GND LN2700 1.95V~3.6V D_3.15V NC_8 SE2700 NC_15 3 AXIAL ACCELERATION C2700 NC_16 SENSOR 4.7u C2701 0.1u C2702 0.1u REG_GND I2C_SCK...
  • Page 137 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CN3000 REG_GND REG_GND REG_GND REG_GND CN3001 D_3.15V D_3.15V_(MR) ROTATE_SENS_ON_1 XPANEL_ROTATION VCCP_I LCD_PWM LCD_PWM CM3003 VDD2_EVF C3004 C3028 EVF_VDD VDD2 0.1u REG_GND LCD_B_0 FB3000 R3000 LCD_DB_0 C3009 C3020 LCD_DB_0 2.2u FB3001 R3001 LCD_B_0 LCD_B_1 LCD_DB_1 LCD_DB_1 LCD_B_0 FB3002 R3002...
  • Page 138 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y R3401 A_1.8V C3400 CM8502 IC8501 RP130K281D-TR AUDIO_5.5V 2.8V REG CM8501 VOUT CE/CE LN3403 C8528 C8517 MIC_GND CM8500 REG_GND R3404 D_3.15V AV_SO R3405 LN3400 AV_SCK LN3401 XCS_AVIO R3406 LN3404 CM8503 C8519 0.1u LN3402 R8500 R8503 6.8k R8501 R8504 6.8k...
  • Page 139 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y EVER_3.15V R3802 R3800 100k 3.3k CAM_SO_2 XCS_EXT_FL IC3800 74LVC2G240DC-125 IC3800, Q3800, Q3801 EXTERNAL FLASH I/F CAM_SCK_2 CAM_SI_2 EXT_FLASH_F3 EXT_FLASH_F2 C3800 0.1u Q3800 R3801 RN1102MFV(TL3S 100k REG_GND Q3801 RN1102MFV(TL3S SY-1094 BOARD (24/27) 4-26 SYS SET...
  • Page 140 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y R4224 D_3.15V_MEDIA CM3903 IC5500 SD0_3.1_PWR_ON SD_3.15V_SDIO0 VOUT_B1 NX5P2924CUKZ CM3900 R4234 B+ SWITCH R4238 4.7k C4209 Q4203 SSM3J56MFV R4239 B+ SWITCH SDIO0_VDD CM3901 R4232 220k C4212 SDIO0_18SW IC5501 RP114K181B-TRB 1.8V REG D_3.15V_MEDIA VOUT C4211 R4233 C4210 SD0_1.8_PWR_ON EVER_3.0V REG_GND...
  • Page 141 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D_3.1V D_3.15V HDMI_JACK_IN R9002 XX R9001 XX L9000 HDMI_DATA2+ HDMI_TX2SOP HDMI_DATA2– HDMI_TX2SON L9001 HDMI_DATA1+ HDMI_TX1SOP HDMI_DATA1– HDMI_TX1SON CN9000 R9003 XX R9004 XX HotPlugDetect L9002 HDMI_DATA0+ HDMI_TX0SOP Utility HDMI_DATA0– HDMI_TX0SON Data2+ L9003 HDMI_CLOCK+ Data2Shield HDMI_TXCP HDMI_CLOCK– HDMI_TXCN Data2– R9005 XX...
  • Page 142 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y R4903 XINT_FLASH_UP_SENSE CN4900 REG_GND Q4900 C4922 RN1104MFV(TL3S SHUT_MG_5.5V SHUT_5.5V INVERTER SHUT_5.5V FB4900 AUDIO_GND SHUT_5.5V MIC_GND C4921 C4924 CM4923 CN4902 SHUT_5.5V R4923 XX EXT_MIC_R JK-1024 EXT_MIC_R REG_GND AUDIO_GND CL4902 SHUT_5.5V R4922 XX FLEXIBLE EXT_MIC_L INT_FLASH_FULL INT_FLASH_FULL C4925 SHUT_5.5V EXT_MIC_L...
  • Page 143 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LND001 LND002 MS_D3 REG_GND MS_D3 MS_D3 MS_D1 MSX_D[3] MS_D1 MS_D1 MS_D3 MSX_D[1] MS_D1 MS_D0 MS_D0 MS_D0 MS_D7 MSX_D[0] MS_D7 MS_D7 MS_D0 MSX_D[7] MS_D7 MS_D4 MS_D4 MS_D4 MS_D2 MSX_D[4] MS_D2 MS_D2 MS_D4 MSX_D[2] MS_D2 MS_D6 MS_D6 MS_D6 MSX_D[6] MS_D5...
  • Page 144 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SD_CLK SD_CLK CL202 RB201 CM210 MSX_CLK R207 CN_SD_D[0] SD_D[0] CN_MSX_BS R208 CM211 SD_D[1] CN_SD_D[1] R209 CM212 CN_SD_D[3] SD_D[3] CN_MSX_D[0] R210 CM213 CN_SD_D[2] SD_D[2] CN_MSX_D[1] CN201 SD_D[0-3] CN_MSX_D[2] SD_DAT_2 CN_SD__CMD CN_MSX_D[3] MSX_BIO_4 SD_CMD R203 CN_MSX_D[4] SD_DAT_3 XMS_INS_HIZ CN_MSX_D[5] XMS_INS_HIZ...
  • Page 145 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y REG_GND SHUTTER_ID C303 SHUTTER_PI_VCC C302 SHUTTER_PI C301 SHUTTER_5.5V 11 12 PI_C R6783 PI-C PI_E PI-E PI_A PI-A SHUTTER PI_K UNIT PI-K COMMON COMMON Q6782 SHUTTER_PI_ON MTM765200LBF SHUTTER_PI_ON Q6781 CN302 SHUTTER DRIVE Q6780 RN1102MFV(TL3S LED DRIVE R6782 4.7k 1ST_CURTAIN_MG...
  • Page 146 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LN001 REG_GND SE001 REG_GND C001 PANEL ROTATION SENSOR 0.1u REG_GND REG_GND D_3.15V LN002 XPANEL_ROTATION REG_GND LCD_PWM LCD_PWM REG_GND REG_GND LCD_DB_0 LCD_DB_0 LCD_DB_1 LCD_DB_1 LCD_DB_2 LCD_DB_2 LCD_DB_3 LCD_DB_3 LCD_DB_4 LCD_DB_4 LCD_DB_5 LCD_DB_5 LCD_DB_6 LCD_DB_6 LCD_DB_7 LCD_DB_7 REG_GND REG_GND LCD_DG_0...
  • Page 147 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y CN0004 VCOM VCOM REG_GND AVSS AVEE REG_GND AVEE CL0001 LCD_PWM AVDD LCD_PWM AVDD REG_GND LEDPWM LCD_DB_0 CL0002 LCD_DB_1 LCD_DB_2 LCD_DB_3 LCD_DB_4 LCD_DB_5 LCD_DB_6 CL0003 LCD_DB_7 REG_GND CL0004 LCD_DG_0 LCD_DG_1 LCD_DG_2 LCD_DG_3 LCD_DG_4 LCD_DG_5 CL0005 LCD_DG_6 LCD_DG_7 CL0006 REG_GND...
  • Page 148 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D5800 D5801 T801 DA2JF6500L RR264M-400 17 18 T_HV XE_A T_CENTER XE_A XE_A VOUT_FL R5809 XE_A DRAIN UNREG_OUT_FL UNREG_OUT_FL L5800 TRIG_+ 2.2uH C5801 R5803 FLASH TRIG_+ UNIT GND_ACC TRIG_- R5804 D_3.15V_ACC C5803 TRIG_- 0.047u FULL 350V LND804 XE_K INT_FLASH_CHARGE...
  • Page 149 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LND751 CN7551 MIC_GND MIC_GND XEYE_SENS_OUT_MSS MIC_L/GVIF_SDATA_N MIC_L/GVIF_SDATA_N MIC_R/GVIF_SDATA_P MIC_R/GVIF_SDATA_P I2C_SDA REG_GND REG_GND_7 I2C_SCK GPS_PWR_CTRL/WLAN_SD_CLK GPS_PWR_CTRL/WLAN_SD_CLK GPS_CTS/WLAN_SD_D0 GPS_CTS/WLAN_SD_D0 GPS_RTS/WLAN_SD_D1 GPS_RTS/WLAN_SD_D1 MULTI GPS_UART_TXD/WLAN_SD_D2 GPS_UART_TXD/WLAN_SD_D2 INTERFACE SHOE GPS_UART_RXD/WLAN_SD_D3 GPS_UART_RXD/WLAN_SD_D3 LOGIC_VDD LOGIC_VDD SE2700 EYEPIECE MIC_C/WLAN_SD_CMD/SP_OUT/AUDIO_L MIC_C/WLAN_SD_CMD/SP_OUT/AUDIO_L SENSOR REG_GND REG_GND_15 ST-1035 FLEXIBLE XGPS_RST/XWLAN_RST/AUDIO_R...
  • Page 150 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y Q8800, Q8801 B+ SWITCH Q8801 RW1C025ZPT2CR SE3800 SHOE_UNREG SHOE_UNREG_FUSE SENSOR MAGNETIC C3800 FLASH POP-UP R8800 C8800 0.1u DETECT Q8800 R8801 RN1104MFV(TL3S IHS_UNREG_ON REG_GND D8800 1SS400TE61 INT_FLASH_FULL INT_FLASH_FULL SHOE_GND D_3.15V_ACC D_3.15V_ACC INT_FLASH_TRIG INT_FLASH_TRIG INT_FLASH_CHARGE INT_FLASH_CHARGE POP_UP_IC_GND INT_FLASH_UP_SENSE D_3.15V_ACC_POPUP_VCC N.C.
  • Page 151 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y D0001 R0006 CSL0701DT5 POS.E POS.F AF ILLUMINATOR, R0005 SELF-TIMER, 4.7k POS.D POS.G SMILE SHUTTER LN0001 POS.H R0010 AF_LED_A R0004 AF_LED_A 2.2k 3.3k AF_LED_K POS.C R0009 R0003 AF_LED_K 3.3k 2.2k POS.B POS.I MODE_DIAL_A MODE_DIAL_A POS.A POS.J R0008 MODE_DIAL_B MODE_DIAL_B 4.7k...
  • Page 152 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LN0001 S0003 REG_GND0 REG_GND0 XMOVIE_REC XMOVIE_REC A_1.8V A_1.8V VCC_KEY_AD XDEL XDEL XDIAL_1_B XDIAL_1_B WHEEL_B XDIAL_1_A CONTROL SWITCH BLOCK XDIAL_1_A WHEEL_A (BK79700: BLACK Model) KEY_AD1 (SL79700: SILVER Model) KEY_AD1 KEYAD XDIRECT_PB XDIRECT_PB XFUNC XFUNC REG_GND1 REG_GND1 CN0001 RL-1060 XMENU...
  • Page 153 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y FPC-2010 FLEXIBLE BOARD WIRELESS LAN ANTENNA L7381 ET7381 C7381 0.7p R7381 L7383 C7383 R7383 L7382 C7382 R7382 5.1nH LND006 NET1_PIN16 NET1_PIN15 NET1_PIN14 NET1_PIN13 NET1 LND001 NET1_PIN12 NET1_PIN11 SY-1094 NET1_PIN10 BT901 (27/27) NET2_PIN9 BATTERY CN4901 NET2 TERMINAL NET2_PIN8 LND002...
  • Page 154 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y 5. PRINTED WIRING BOARDS (ENGLISH) (JAPANESE) THIS NOTE IS COMMON FOR PRINTED WIRING プリント図共通ノート BOARDS (他に必要なノートは各セクションに記載していま (In addition to this, the necessary note is printed す) in each block) For Printed Wiring Boards プリント図ノート • : Uses unleaded solder.
  • Page 155 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y IS-1027 BOARD (SIDE B) IS-1027 BOARD (SIDE A) C6051 C6031 C6087 C6017 C6083 C6037 C6033 C6075 C6052 C6028 C6086 C6078 C6006 C6082 C6036 C6032 C6074 C6015 C6004 L6004 Q6006 Q6003 R6021 C6055 C6049 C6054 C6048 C6094 R6020 R6013...
  • Page 156 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y ISL-2005 FLEXIBLE BOARD ISP-2004 FLEXIBLE BOARD LND002 LND001 MDV-2000 FLEXIBLE BOARD CN001 >PI< 1-980-882- 11 LND002 LND001 1-894-655- 11 1-894-656- 11 SYS SET...
  • Page 157 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y J7381 SY-1094 BOARD (SIDE A) CL4901 CN4902 R7891 R7892 Q4900 SE2700 CL4900 R7890 CL4902 Q7890 Q7891 C4901 C4902 R3412 C4900 D4901 CN4901 CN3001 C4913 R4926 C8504 CL7400 VR4900 D0811 C8520 C8521 C8511 D0810 R4924 CL0014 IC8500 CL2406 CL7401...
  • Page 158 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SY-1094 BOARD (SIDE B) LN4901 C3019 SP901 R1177 VR4901 (SPEAKER) Q5702 R0718 VR4902 R4930 LN4900 CL0731 Q0600 R2318 F0006 D4902 IC8501 R5712 C0705 CL0759 C4920 C3800 R4929 C3009 R5713 IC5700 CL0765 R3802 C8528 R0720 R0733 R0738 C3001 IC3800...
  • Page 159 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y BT101 LITHIUM CN-1039 BOARD (SIDE A) CN-1039 BOARD (SIDE B) BATTERY BH101 R203 R204 CL202 CL201 R7100 RB201 R219 D6780 R6780 Q6782 R6781 R6782 C302 C303 Q6780 CN201 Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
  • Page 160 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y LC-1045 BOARD CN0003 JK-1024 FLEXIBLE BOARD R0004 CN0002 C0001 R0005 CN0001 R0006 R0003 R0002 R0001 J K 1 0 2 4 - 1 1 C0003 C0002 > P I < C0010 C0004 C0017 C0007 D0001 PLUG IN J0001...
  • Page 161 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y SE3800 (FLASH POP-UP DETECT) C3800 MIC902 ST-1035 FLEXIBLE BOARD (MICROPHONE) (R) MIS-2003 FLEXIBLE BOARD MIC901 (MICROPHONE) (L) Q5800 R5808 CN7551 (MULTI INTERFACE SHOE) + + + + + LND383 LND382 C3802 C3801 CL800 CL801 LND385 LND384 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B...
  • Page 162 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y RL-1060 FLEXIBLE BOARD PH0002 PH0001 HA003 KKA001 S0004 (MODE DIAL) IC0001 C0008 R0006 R0010 R0005 S0002 S0001 R0009 (SHUTTER) R0004 R0008 R0003 R0007 D0001 S0003 ON/OFF R0001 C0007 R0002 C0009 C0001 C0002 ANT901 (NFC ANTENNA) TH0001 C0003 LN0002...
  • Page 163 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y RS-1013 FLEXIBLE BOARD KKA002 S0004 S0001 MENU S0003 CN0001 S0002 AF/MF HA003 1-983-781- 11 KKA001 TH0001 C0002 SE0002 (PANEL ROTATION DETECT) SE0001 (PANEL CLOSE DETECT) C0001 LN0001 5-10 SYS SET...
  • Page 164 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y AN-1028 BOARD R7383 ET7381 L7383 C7383 R7381 J7391 L7381 C7381 R7382 L7382 C7382 BT-2011 FLEXIBLE BOARD 1-983-695- 11 FPC-2010 FLEXIBLE BOARD 1-889-866- 11 BT901 (BATTERY TERMINAL) 1-893-251- 12 5-11E SYS SET...
  • Page 165 2019/01/30 03:23:14 (GMT+09:00) ILCE-6400/6400L/6400M/6400Y Revision History Ver. Date History Contents 2019.01 Official Release — SYS SET...

This manual is also suitable for:

Ilce-6400lIlce-6400m