Sharp MZ-700 Series Owner's Manual page 32

2. 3. 1. 3 VERIFY
(abbreviated format: V.)
Format
Function
VERIFY or VERIFY "filename"
This command is used to confirm that programs have been properly recorded on
tape by the SAVE command. This is done by playing the tape and comparing the
program read with the program contained in memory. If both programs are the
same, " O K " is displayed; if they are different, "READ error" is displayed.
In the latter case, save the program again.
Then use the V E R I F Y comand!
VERIFY
I want t o check whether my program has
been properly recorded. . .
L
(S
(1) Rewind the tape.
(3) A P L A Y is displayed on the T V
screen.
d
(2) Type in V E R I F Y " N A M E '
( " N A M E " is not necessary if no
file name has been assigned).
(4) Press the | P L A Y [ button on the data recorder
!5) FOUND "%. This is displayed if the program finds another program
before that which is to be verified. If that program has
J ^ \ ^Jy V
a n a m e
. it is displayed where indicated by "% x x x
0 6 ) FOUND " N A M E " Displayed when the program to be verified is found.
V ^
(8) R E A D error, / ~ ( 7 ) V E R I F Y I N G " N A M E
R E A D Y Indicates that the tape file is being
Indicates that the progrannwas\J compared with the program in
not correctly recorded; re-record)\rnemory.
it w i t h the SAVE command.
30