Character Input And Mouse Pointer; Entering Characters Using A Mouse; Controlling Mouse Pointer From The Front Panel (Without Connecting A Mouse (Sold Separately)) - JVC LST0728-001C Instructions Manual

Preparation
Character Input and Mouse
Pointer
You can input characters and move the mouse pointers in two
different ways.
● Operate using the buttons on the front panel.
● Operate by connecting a mouse (sold separately).
Memo :
● Connecting a mouse eases the specification of complex settings
as well as input of characters.
● Connection to a keyboard is not recommended.
Keypad
WARNING
LIVE/BROWSE
ALARM
OPERATE
SELECT HDD
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL ZOOM OUT ZOOM IN ENTER
[16/ENTER] Button
[KEY] Button
Keypad
[ZOOM IN/ENTER] Button
[KEY] Button
28
VR-N1600U/E
REV
SEARCH KEY ALARM CLEAR REC/STOP STOP(PB) PLAY
VR-N900U

Entering Characters Using a Mouse

You can use the software keyboard to input characters when you
are using mouse.
1
Press the [KEY] button on the front panel
● The software keyboard appears.
● Press the [KEY] button again to hide the software
keyboard.
Software Keyboard
FWD
2
Move the mouse pointer over the character on
SKIP
the software keyboard that you want to enter
3
Click on the character
Note :
● The [16/ENTER](ZOOM IN/ENTER) button is enabled with a
click of a mouse when the software keyboard is displayed.
Controlling Mouse Pointer from the Front
Panel (Without Connecting a Mouse (Sold
Separately))
When a mouse is not connected, you can operate the mouse
pointer from the front panel.
1
Press the [KEY] button
● The software keyboard appears.
● Press the [KEY] button again to close the software
keyboard.
2
Move the mouse pointer with the keypad (arrow
key)
● Pressing the [16/ENTER](ZOOM IN/ENTER) button has
the same effect as clicking at the position of the mouse
pointer.
Memo :
● You can move the software keyboard by dragging any portion of
the keyboard other than the keys with the mouse.
● To drag the software keyboard from the front panel, press the
arrow buttons on the keypad while holding down the [16/
ENTER](ZOOM IN/ENTER) button.
● You can move the mouse pointer with the keypad when the
software keyboard is displayed.