Recording Before/After Occurrence Of Event Or Motion; Ptz Camera Control - JVC LST0728-001C Instructions Manual

Jvc network video recorder instruction manual
Table of Contents

Advertisement

Recording Before/After
Occurrence of Event or
Motion
You can record images before and after the occurrence of an event
or motion when recording in the recording control mode
(A Page 53).
Stopped
Records for set time before
Set time
1
Go to [Settings] (A Page 56), and select
AConditionallyB in [Recording Settings]-[When
to store images in database]
2
Select AOn motionB or AOn eventB
3
Specify the number of seconds in [( )seconds
pre/post recordings on motion/event]
● Images are recorded during the specified time interval
before and after an alarm or motion is detected.
1
Memo :
● Sequences refers to sequences of images that are recorded
when an event or motion is detected.
● For details on using sequences, refer to [Searching Recorded
Image Using Sequence] (A Page 44).
Motion or event
Stopped
Records for set time after
Set time
2
3

PTZ Camera Control

Connecting the PTZ camera to the COM port of the network
encoder (VN-E4) enables the PTZ control on the live screen of the
NVR Viewer. For details on PTZ camera settings, refer to [PTZ
Camera Settings (COM1/COM2)] (A Page 88).
For cameras that have specified the [JCBP-S] protocol in AP/T/Z
type controlled through COM1/COM2B of [PTZ Camera Settings
(COM1/COM2)], control of the iris, focus and camera menu are also
enabled on the live screen of the NVR Viewer in addition to PTZ
control.
Memo :
● A PTZ camera is an analog camera with an analog output that
enables PTZ control via RS-485.
WARNING
LIVE/BROWSE
OPERATE
ALARM
SELECT
HDD
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[5] Button
[FUNCTION] Button
1
Press and hold the [FUNCTION] button, and
press the [5] keypad button at the same time
● The [Camera Control] screen appears.
2
Select the camera you want to control from the
camera selection list, and click the
[Connect(ENTER)] button
● Camera control is enabled.
● The functions of the buttons are described below.
[NVR]
REV
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
2
139
FWD
SKIP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-n1600uVr-n1600eVr-n900u

Table of Contents