Adding Cameras To A View; Adjusting Camera Settings - JVC LST0728-001C Instructions Manual

Adding Cameras to a View

1
Select a view
● The layout of the selected view appears.
2
Click the [+] mark to the left of [Server] under
[System Overview]
● A list of available cameras appears.
2
Camera
List
3
Select the camera you want to add from the list,
and drag the camera name over the screen of
the view on the right
● An image from the selected camera appears together with
the camera name.
● Repeat the procedure for each camera that you want to
add.
Memo :
● Images from a total of 16 cameras can be simultaneously
displayed. (VR-N1600U/E)
● Images from a total of 9 cameras can be simultaneously
displayed. (VR-N900U)
[Screen Setup] Screen
[Server]

Adjusting Camera Settings

1
Select the camera you want to adjust on the
[Screen Setup] screen
2
Select [Properties]
A
B
C
D
E
F
G
H
3
Adjust the following camera settings
accordingly
Item
A
Camera Displays the name of the selected camera.
(This is a read-only field.)
Name
B
Image Enables you to adjust the image resolution
and picture quality during viewing. Select
Quality
[Full] at all times.
C
Frame Rate This is the viewing frame rate.
Select [Unlimited] (default value; same as
live settings), [Medium] (25 % of the frame
rate), or [Low] (5 % of the frame rate),
depending on the frame rate specified in
[Live Settings] (A Page 56) on the
[Camera Settings] screen.
D
Maintain If this check box is selected, images will
not be stretched to fit the size of the
Image
display position. Images will be displayed
Aspect
in the aspect ratio (horizontal to vertical
Ration
ratio of the screen) that they have been
recorded.
E
Update on If this check box is selected, the camera's
images will only be updated on the [Live]
Motion
screen when motion is detected.
F
Sound on Enables notification with a simple sound
when motion is detected while viewing
Motion
images from the camera on the [Live]
Detection
screen.
Always off Does not produce sound notification when
motion is detected.
Always on Notifies with a sound each time motion is
detected.
[Screen Setup] Screen
Description
63